In 1949, the Newark College of Engineering granted its first Master’s degrees, two each in Electrical Engineering and Mechanical Engineering. To date, NJIT has awarded more than 4,500 Master’s degrees. In addition to the theses from the more than 50 master’s programs, this collection includes theses for the professional degrees awarded prior to the establishment of the Graduate Division and theses for graduates with the designation Degree of Engineer. The library has accepted electronic submissions since 2010 and has been digitizing new theses and dissertations since 2000. We continue to digitize our catalog working backwards and by request.
The Robert W. Van Houten Library provides this service in an effort to make our graduates’ research more widely available.
Theses from 1993
Implementing a tool for designing portable parallel programs, Geetha Chitti, May 1993
Computer Science
An improved human gait model incorporating the effects of muscle activity and joint friction, Tae Ho Choi, January 1993
Electrical and Computer Engineering
The permeability of hot mix asphalt concrete with petroleum contaminated soils, Kuen-yuan Chuang, January 1993
Civil and Environmental Engineering
A review of acetabular prostheses for total hip arthroplasty, Jennifer Anne Citarella, May 1993
Biomedical Engineering
Performance of the stirling cycle thermal regenerator, Cesar A. Cravo, October 1993
Mechanical and Industrial Engineering
Entrance effects for short catalytic combustion monoliths, Dong Dai, January 1993
Mechanical and Industrial Engineering
A planning model for intermodal auto-rail transportation assignment, Daniel Disario, January 1993
Civil and Environmental Engineering
Attachment systems for curtain wall construction and maintenance requirements, Peter S. Donaghy, October 1993
Civil and Environmental Engineering
The design thing : a study of design in practice and theory, Magd Donia, May 1993
New Jersey School of Architecture
Performance of different strategies for error detection and correction in arithmetic encoding, George F. Elmasry, May 1993
Electrical and Computer Engineering
Modern techniques used to improve a hearing conservation program in a power generating plant, Eilyn Fabregas, May 1993
Mechanical and Industrial Engineering
Study of EMG frequency behavior, Mark Steven Fiedorowicz, May 1993
Biomedical Engineering
Computer assisted molecular modeling of thymidine nucleoside analog inhibitors of HIV-1 reverse transcriptase, Mark A. Fisher, October 1993
Biomedical Engineering
Integration of pneumatic fracturing to enhance in situ bioremediation, Conan Dante Fitzgerald, May 1993
Civil and Environmental Engineering
The development of a senior unit operations laboratory on the supercritical extraction of solid naphthalene with supercritical carbon dioxide, Ronald G. Gabbard, October 1993
Chemical and Materials Engineering
A parallel processing architecture for DQDB protocol implementation, Nilesh Vinubhai Gandhi, October 1993
Electrical and Computer Engineering
Dynamics of blood coagulation, Jie Gao, January 1993
Biomedical Engineering
Laser ablation of silicon surfaces : the effects of a low level background light, Taposh Kumar Gayen, October 1993
Physics
Studies of wet thermal oxidation of silicon and porous silicon, Nilesh A. Gharia, January 1993
Electrical and Computer Engineering
An analysis of a custom expanding total femoral prosthesis with a rotating hinge knee, RamaRao Gundlapalli, V. Gundlapalli, October 1993
Biomedical Engineering
Chemistry and Environmental Science
An efficient guaranteed bandwidth and balancing mechanism for high speed MANs, Venediktos Hadjisavvas, October 1993
Electrical and Computer Engineering
Simplification of the generalized adaptive neural filter and comparative studies with other nonlinear filters, Henry Steven Hanek, October 1993
Electrical and Computer Engineering
Properties and determination of optimal decentralized feedback structure, Kangsong Han, May 1993
Electrical and Computer Engineering
Microwave GaAs MESFET nonlinearity and large-signal modeling, Yan He, January 1993
Electrical and Computer Engineering
Reverse engineering : an evaluation of contact technology and application in manufacturing systems, Shailesh V. Jadhav, January 1993
Mechanical and Industrial Engineering
Geometric dimensioning and tolerancing a tool for concurrent engineering, Tapan Kumar S. K. Jain, May 1993
Mechanical and Industrial Engineering
Model parameter identification of the oscillatory potential in the electroretinogram, Sung Hoon Jang, October 1993
Electrical and Computer Engineering
The flow approach to swept volume, Haitao Jiang, January 1993
Mathematical Sciences
Adaptive two-stage detection scheme in synchronous two-user CDMA systems, Yong Jiang, May 1993
Electrical and Computer Engineering
Object oriented design of petri net simulator, Himanshu Juneja, October 1993
Electrical and Computer Engineering
Partial VLSI implementation of the architecture for reusable components (ARC), Deepak Kakadasam, January 1993
Electrical and Computer Engineering
Techniques of petri net reduction, Sreeranga Kalavapalli, May 1993
Computer Science
Trouble shooting in plastic injection molding machines, Zafar Kamal, January 1993
Mechanical and Industrial Engineering
Application of imaging pyrometry for remote temperature measurements, Michael B. Kaplinsky, January 1993
Electrical and Computer Engineering
Processing and application of polyolefin plastics, Muhammad Khalid, October 1993
Mechanical and Industrial Engineering
Development of an intelligent geometry measurement procedure for coordinate measuring machines, Tae-Sung Kim, October 1993
Mechanical and Industrial Engineering
Mechanism of pneumatic fracturing, Trevor Compton King, May 1993
Civil and Environmental Engineering
Application of organophilic clay, Koshy Koshy, January 1993
Chemistry and Environmental Science
Synthesis and characterization of LPCVD boron nitride films for x-ray lithography, Wen-Pin Kuo, January 1993
Physics
A review of energy storing prosthetic feet and computer aided structural optimization of a below-knee prosthesis, Poonam Gope Lalwani, January 1993
Biomedical Engineering
Vibratory size segregation of particulate matter, Anthony La Rosa, October 1993
Mechanical and Industrial Engineering
An implementation of a versatile camera calibration technique for high-accuracy 3D machine vision metrology using off-the-shelf TV camera and lenses, Bolang Li, May 1993
Electrical and Computer Engineering
Forward kinematics solution of a special class of general stewart platforms, Jian Li, January 1993
Mechanical and Industrial Engineering
Investigation of reaction kinetics of hydrogen chloride with calcium oxide by fourier transform infrared spectroscopy, Maosheng Li, October 1993
Chemistry and Environmental Science
Implementation of an object-oriented university database using VODAK/VML prototype-2/C++, Bheeman Lingan and Madhumathi Tulasiram, May 1993
Computer Science
Modification of wear testing machine and study of wear resistance, Ning Li, January 1993
Mechanical and Industrial Engineering
Local stress factors of pipe-nozzle due to radial load, circumferential and longitudinal moments, Junyu Lin, October 1993
Mechanical and Industrial Engineering
A direct method for surface structure recovering based on UOFF, Ping Lin, January 1993
Electrical and Computer Engineering
Performance analysis of pyramid mapping algorithms for the hypercube, Jing-Chiou Liou, January 1993
Electrical and Computer Engineering
A simulation of a monitoring and alarm system in an energy management system, Hui-Jen Liu, May 1993
Mechanical and Industrial Engineering
Finite-element ray tracing, Yong-chun Liu, October 1993
Mathematical Sciences
Computerizing occupational safety and health information, James Luke, January 1993
Mechanical and Industrial Engineering
Improving the jitter performance of timing recovery by employing delay shifts, Xin De Lu, May 1993
Electrical and Computer Engineering
A comparison of integration architectures, Amar Mahidadia, January 1993
Computer Science
Stepwise reduction and approximation method for performance analysis of generalized stochastic petri nets, Jinming Ma, January 1993
Mechanical and Industrial Engineering
Modal control of flexible beam using smart mateirals, Sujata Mallepalle, January 1993
Electrical and Computer Engineering
A mathematical model for the prediction of depth of cut in the course of AWJ machining, Naijian Ma, May 1993
Mechanical and Industrial Engineering
Coordinate measuring machines : a modern inspection tool in manufacturing, Matthias Richard Mantel, May 1993
Mechanical and Industrial Engineering
Modeling of rapid thermal processing system by finite element method, Helen Martynov, October 1993
Electrical and Computer Engineering
Polarimetric fiber optic sensor for the measurement of strain, Wei Ma, May 1993
Electrical and Computer Engineering
Design of a 320X122 MWIR-CCD PtSi-Si imaging radiometer with automatic optical integration time control, Nathaniel Joseph McCaffrey, May 1993
Electrical and Computer Engineering
Heat resistance measurements with the portable calorimeter box, Philipp G. Mohr, January 1993
Mechanical and Industrial Engineering
Development of a model for an objective minimum resolvable temperature difference characterization of an infrared camera, Christine Issa Mourad, January 1993
Electrical and Computer Engineering
Graphics interfaced computer automated process planning, Ajit Nimbvikar, January 1993
Mechanical and Industrial Engineering
Laboratory health and safety compliance guide for private colleges and universities, Gina Marie Ochs, May 1993
Mechanical and Industrial Engineering
A high-temperature pressure sensor utilizing linear voltage differential transformer (LVDT) and silicon wafer-to-wafer fusion bonding technologies, Robert Sylvester Okojie, October 1993
Electrical and Computer Engineering
Torque and current response due to singularity changes of induction machine slip, Jessie G. Orpilla, January 1993
Electrical and Computer Engineering
Investigation of the PL CEBUS performance with and without acknowledgment, Menghan Pan, October 1993
Electrical and Computer Engineering
An application of neural networks to statistical process control, Asterios Papaikonomou, October 1993
Mechanical and Industrial Engineering
Computer aided manufacturing for production environment, Biren K. Parikh, January 1993
Mechanical and Industrial Engineering
Protocol conformance test generation using circular UIO with overlapping, Sesharao Patchipala, January 1993
Informatics
Translation of images on the hypercube using leaf codes, Bhavesh Patel, January 1993
Electrical and Computer Engineering
Radiation from a tapered dielectric rod antenna, Anil Prabhakar, October 1993
Electrical and Computer Engineering
Recursive soft morphological filters, Padmaja Puttagunta, May 1993
Computer Science
Non-contact measurement for thermal conductivity of diamond-like and hard carbon thin films, Ganming Qin, May 1993
Physics
Far infrared fourier transform spectroscopy using ring interferometer, Changqing Qiu, October 1993
Physics
Aluminum epitaxy on silicon, Samuel Cruz Ramac, May 1993
Electrical and Computer Engineering
Systems integration in pharmaceutical industry using object-oriented expert system technology, Korrapolu Reddy, January 1993
Informatics
A petri net toolkit for parallel program debugging, Potla Kishore Reddy, January 1993
Computer Science
The postbus fault tolerant CLOS network, Udayabhanu Sarangapani, May 1993
Electrical and Computer Engineering
Reducing health and safety risks by replacing compressed air with an electromechanical system, Joseph Michael Schwed, May 1993
Mechanical and Industrial Engineering
Multilevel embeddings for massively-parallel hypercubes, Devenkuma P. Shah, May 1993
Electrical and Computer Engineering
Design of mask for striped filters and thin-film multi-layer emissivity modeling for multi-wavelength imaging pyrometer, Jitesh Navinchandra Shah, October 1993
Electrical and Computer Engineering
An enhancement and improvement of a prototype distributed system based on elements of an integration architecture, Kunal R. Shah, January 1993
Computer Science
Real time control of a dual resonator system, Penghuai Shen, October 1993
Electrical and Computer Engineering
Hardware design for JPEG and a comparative study of JPEG and MPEG image compression algorithms, Aravind Soundararajan, October 1993
Electrical and Computer Engineering
Development of a composite user equilibrium and system optimization assignment model, Kimberly M. Stump, January 1993
Civil and Environmental Engineering
Optimization of flow in the collecting duct during the concentrating mode and the diluting mode in a nephron population of two different length with the renin angiotensin system and ADH mechanism, Sivakumar Subramanian, October 1993
Biomedical Engineering
Linear CCD motion detection system, Thekepat J. Sudesh, October 1993
Electrical and Computer Engineering
Microengineered mass spectrometer with field emission ionization source, Chao Sun, May 1993
Electrical and Computer Engineering
Computer simulation of intracranial hemodynamics during the induction phase of anesthesia, Gopinath P. Sundaram, May 1993
Biomedical Engineering
Bayesian methods in preoperative risk assessment for cardiac surgery, Huey-chung Teng, May 1993
Mathematical Sciences
Cause and effect diagrams for process analysis and control, Philip Thomas, January 1993
Mechanical and Industrial Engineering
Fracture of cementitious composites, Sira Tindukasiri, May 1993
Civil and Environmental Engineering
Design of holographic optical interconnections, Su-Chiou Tsay, January 1993
Electrical and Computer Engineering
Compliance documentation for OSHA's bloodborne pathogen standard including exposure control plan and training, Edward Lloyd Tyerman, May 1993
Mechanical and Industrial Engineering
A multicompartmental model for the simulation of soluble gas exchange in the lungs, Chitaranjan Varadhan, May 1993
Biomedical Engineering
Simulation of manufacturing cell using HOOPS graphic software and SIMAN simulation language, Parikh Vipul, May 1993
Mechanical and Industrial Engineering
Three dimensional magnetic field sensors and array in BiCMOS technology, Bingda Wang, January 1993
Electrical and Computer Engineering
Graphical deep knowledge representation in VODAK/VML object-oriented database, Jue Wang, May 1993
Computer Science
Investigation of the effects of methyl chloride addition on premixed, laminar, methane/air flat flames, Limin Wang, May 1993
Chemical and Materials Engineering
Modeling and simulation of magnetic micromotor performance, Ping Wang, May 1993
Electrical and Computer Engineering
Optical flow determination and motion analysis, Qian Wang, January 1993
Electrical and Computer Engineering
Modeling and analysis of semiconductor manufacturing processes using petri nets, Xinyao Wang, May 1993
Electrical and Computer Engineering
Blur identification and restoration of images of coronary microvessel, Kuen Tak Wong, May 1993
Biomedical Engineering
Monolithic silicon opto-electro-mechanical light modulator, Ching-Horng Wu, March 1993
Electrical and Computer Engineering
Magnetohydrodynamic behavior under current impulse excitation, Shi Wu, October 1993
Electrical and Computer Engineering
Experimental investigation of submerged, turbulent, axisymmetric air jet impinging on a flat plate, Lan Xiao, October 1993
Mechanical and Industrial Engineering
Microstructural investigation of surface coating developed by electro-spark deposition technology, Tianzong Xu, January 1993
Mechanical and Industrial Engineering
Computer aided finite element stress analysis of a three dimension mandibular bone model using I-DEAS software, Yixiong Xu, January 1993
Biomedical Engineering
A programmable integrated power supply for the electrostatic-drive micromotor, Chao Ye, January 1993
Electrical and Computer Engineering
Fingerprint pattern recognition for medical uses, Feng You, January 1993
Biomedical Engineering
Evaluation of collision properties of spheres using high-speed video analysis, Jian Yu, October 1993
Mechanical and Industrial Engineering
Synthesis and characterization of silicon nitride films deposited by plasma enhanced chemical vapor deposition using diethylsilane, Yanyao Yu, October 1993
Physics
Mixed culture biodegradation of pentachlorophenol, hexachlorobenzene, and tetrachloromethane under anaerobic conditions, Jesse Zahn, May 1993
Chemistry and Environmental Science
An experimental investigation of wear behavior of ultra-high molecular weight polyethylene under sliding motion, Elham Zand-Moghaddam, May 1993
Biomedical Engineering
Modeling and investigation of current transport phenomena in schottky structures, Yan Zeng, May 1993
Electrical and Computer Engineering
A study of pulsation of chest wall using microwave interferometer, Paul Zeno, January 1993
Biomedical Engineering
Computer implementation of Mason's rule and software development of stochastic petri nets, Xiaoyong Zhao, January 1993
Informatics
The thermal model of the rat under hemorrhagic shock hypothermia with microwave intervention, Liu Zhe, January 1993
Biomedical Engineering
Theses from 1992
Design for productivity using GD&T, Srihari G. Acharya, October 1992
Mechanical and Industrial Engineering
Mathematical model and simulation of the progression of cutaneous T-cell lymphoma, Maria L. Agostinho, October 1992
Biomedical Engineering
A computer implementation of a multi-neuron expandable network, Mary Ellen Ellen Aleksza, May 1992
Biomedical Engineering
Selective no absorption from gas streams with tertiary organic hydroperoxide solutions, Huihong Ao, January 1992
Chemistry and Environmental Science
Computational aspects of a three dimensional non-intrusive particle motion tracking system, Avadhani S. Ashok, May 1992
Mechanical and Industrial Engineering
Computer aided shape optimization using finite element analysis, Charanpreet Singh Bagga, January 1992
Mechanical and Industrial Engineering
Adaptive map configuration and dynamic routing to optimize the performance of a satellite communication network, Santhalingam Balasekar, October 1992
Electrical and Computer Engineering
Pure strong competition for two microbial populations in a chemostat, Efthimios Ioannis Banias, May 1992
Chemical and Materials Engineering
A knowledge-based design system for a housing project for altzheimer's [sic] disease patients and their caregivers, Karin S. Bannier, January 1992
New Jersey School of Architecture
Efficient hypercube communications, Shreyas R. Bhatt, January 1992
Electrical and Computer Engineering
Automatic motion analysis of colliding spheres, John Vijayakumar Caesar, October 1992
Mechanical and Industrial Engineering
Series compensation investigation on the hydro-quebec and NYPA 765 kV transmission system : modeling and stability analysis, Hans J. Candia, January 1992
Electrical and Computer Engineering
Kinetic measuremenmt of decomposition of aniline, 2,4-dichlorophenol and 1,2,4-trichlorophenol using a calorimetric method, Ming-Chin Chang, May 1992
Civil and Environmental Engineering
Graphical image persistence and code generation for object oriented databases, Subrata Chatterjee, May 1992
Informatics
Point pattern matching by heuristic methods : a genetic algorithm and simulated annealing, Erh-Chin Chen, October 1992
Electrical and Computer Engineering
Interpreting and integrating landsat remote sensing image and geographic information system by fuzzy unsupervised clustering algorithm, Gwotsong Philip Chen, May 1992
Computer Science
Analysis of electric field on surface of an atomically sharp field emitter, Ziyan Cheng, May 1992
Electrical and Computer Engineering
A theoretical study of the subband structures and tunneling in polytype heterostructures, Hong Chen, October 1992
Physics
Mathematic models on leaching behavior of chemical solidification and stabilization process for heavy metal sludges, Sz-Hung Chen, January 1992
Civil and Environmental Engineering
Measurement of VOCs pollution from recycling petroleum contaminated soils in hot mix asphalt concrete, Yaoqing Chen, May 1992
Chemistry and Environmental Science
Thermal decomposition of dichloromethane in absence and presence of added oxygen and/or methane, Hong-Ming Chiang, October 1992
Chemistry and Environmental Science
Porting COSMOS expert system from UNIX to DOS, Ching-Jeng Chiu, October 1992
Informatics
Real-TV : RTP/L3's visual monitor, Richard Czop, January 1992
Informatics
A finite element thermal and diffusion analysis at bearing metal interface in extrusion processes, Biju Dennis, January 1992
Mechanical and Industrial Engineering
Uses and applications of artificial intelligence in manufacturing, Manojkumar H. Desai, October 1992
Mechanical and Industrial Engineering
Computer numerical controlled (CNC) machining of screws and dies for plasticating extruders : determination of the criteria for implementing CNC machining, Nilesh H. Desai, January 1992
Mechanical and Industrial Engineering
The durability of hot mix asphalt with petroleum contaminated soils, Bonnie H. DuBose, October 1992
Civil and Environmental Engineering
Characterization of low pressure chemical vapor deposited silicon dioxide thin films, Xue Du, January 1992
Chemistry and Environmental Science
The collapse of the Cypress Viaduct during the Loma Prieta earthquake of October 17, 1989, Mohamed M. Eid, October 1992
Civil and Environmental Engineering
Improvement of light collection efficiency by laser-induced patterning the surface of schottky-barrier solar cells, Kejia Fang, May 1992
Electrical and Computer Engineering
Slow, red-green counterphase (PARVO) and fast, black-white MAGNO) snow in the detection of scotomata in primary open-angle glaucoma, Rey Favis, May 1992
Biomedical Engineering
A theoretical model for biased superlattice devices, Michael Ferner, December 1992
Physics
Evaluation of homogeneity for hazardous waste solidification by video imaging technique, Yi-min Gao, May 1992
Civil and Environmental Engineering
Cost deployment based on quality function deployment, John Goceljak, October 1992
Mechanical and Industrial Engineering
Binary image decomposition and compression using mathematical morphology for object recognition, Venu Gopal Gogusetti, January 1992
Computer Science
Low temperature synthesis and characterization of LPCVD silicon dioxide films using diethylsilane, Chakravarthy Srinivasa Gorthy, May 1992
Newark College of Engineering
I. Removal of chromium from a highly contaminated soil/slag matrix by soil washing at low ph, II. Removal of chromium from impregnated clay matrices by soil washing at low ph, Erez Gotlieb, January 1992
Chemistry and Environmental Science
Attempts to demonstrate reductive dechlorination of chlorobenzenes by anaerobic microorganisms, Melissa S. Gross, January 1992
Chemistry and Environmental Science
Transformations and analysis of parallel real time programs, Chandima J. Gunasekara, May 1992
Computer Science
Kinetics of phenol biodegradation by pseudomonas resinovorans (ATCC 14235), Susmita Guptapal, January 1992
Chemistry and Environmental Science
Processor allocation strategies for modified hypercubes, Nagasimha G. Haravu, May 1992
Electrical and Computer Engineering
Immobilization of heavy metals in incinerator ash using a microbiological system, Gordon Hinshalwood, January 1992
Chemistry and Environmental Science
Performance analysis of queueing systems with synchronous server, Wonmu Hur, October 1992
Informatics
Ion exchanged glass waveguides with efficient coupling to fibers and lasers, Shiqing Hu, January 1992
Electrical and Computer Engineering
Design of stable Di and tetraradical nitroxides as magnetic resonance imaging agents, Radha V. Iyer, May 1992
Chemistry and Environmental Science
Wear and friction of titanium nitride on ultra high molecular weight polyethylene under oscillating motion for evaluation of use in articulating orthopedic applications, David Scott Jacobson, May 1992
Biomedical Engineering
Conditional artificial dielectric : optically controlled microwave modulator, J. Manuel Jimenez, January 1992
Electrical and Computer Engineering
Every day art : demonstrating a new approach to visual arts for children, Abigail Andrea Jones, May 1992
New Jersey School of Architecture
Disinfection of wastewater using ultraviolet radiation, David L. Klemm, May 1992
Civil and Environmental Engineering
Irreversible immobilization of heavy metal, Hyoung-Seog Ko, May 1992
Chemistry and Environmental Science
A study of annular slurry jet for abrasive waterjet cutting, Thomas Kuriakose, October 1992
Mechanical and Industrial Engineering
The acoustic properties of human femoral bone, Mark Lacianca, October 1992
Biomedical Engineering
The removal HCl from hot gases with calcium compounds, Qian Lao, May 1992
Chemistry and Environmental Science
The study of activated sludge settleability using the solids-flux analysis, Churng-Cherng Lin, May 1992
Civil and Environmental Engineering
Expert system for preventive maintenance the aluminum extrusion press and related equipment, E-Ping Lin, May 1992
Newark College of Engineering
A heuristical method of corner points detection on an image boundary, Qiulin Li, January 1992
Computer Science
Thermal oxidative decomposition of chlorobenzene in a tubular flow reactor, Jian Liu, May 1992
Chemistry and Environmental Science
Microwave treatment of hazardous wastes : feasibility studies-mass balances, Liu Liu, April 1992
Chemistry and Environmental Science
Evaluating the homogeneity of solidification/stabilization treated waste soils by chemical analysis method, Mei Liu, May 1992
Chemical and Materials Engineering
Removal of volatile organic compounds (VOC's) acetone and ethyl alcohol emitted in the manufacture of a multi-base propellant, Yih-Leu Liu, October 1992
Chemical and Materials Engineering
Planning of optimal transit system design, Yongning Liu, October 1992
Civil and Environmental Engineering
Automatic surface mount solder joints inspection, Zhu Liu, October 1992
Electrical and Computer Engineering
Local stress due to a radial loading at nozzle-pipe connection with different thickness, Guosheng Lu, May 1992
Mechanical and Industrial Engineering
Microwave treatment of hazardous wastes : feasibility studies - Operating costs, Yongping Lu, May 1992
Chemistry and Environmental Science
Shop floor planning and control in integrated manufacturing systems, Tahir Mahmood, October 1992
Mechanical and Industrial Engineering
Clustering algorithm for local area network design in a CIM environment, A. C. Manjunath, May 1992
Mechanical and Industrial Engineering
An implementation and evaluation of distributed information system based on the OSCA architecture guidelines, Babita Masand, May 1992
Informatics
User interface and data structure design for architectural expert system, Yonghua Ma, October 1992
New Jersey School of Architecture
Posterior stabilized knee design biomechanical considerations, Donald E. McNulty, October 1992
Biomedical Engineering
Design of a material handling system for the automatic assembly of a shower head, Irshad Meherally, May 1992
Mechanical and Industrial Engineering
An information theoretic approach to DSN evaluation, Vivek Mehrotra, October 1992
Electrical and Computer Engineering
A machine entity for a coordinate measurement machine : the generic workcell project, Richard C. Meyer, January 1992
Informatics
Design for manufacturability and assembly, Srinivas Mullapudi, October 1992
Mechanical and Industrial Engineering
Dynamic machine scheduling, expansion, and control of a generic workcell, Peter A. Murray, January 1992
Informatics
The effects of twist on pressure through a teflon vascular prosthesis, Steven Alfred Olivieri, May 1992
Biomedical Engineering
Inability of phanerochaete chrysosporium to degrade polychlorinated biphenyls in sand, Pankaj Pankaj, May 1992
Chemical and Materials Engineering
Modeling and performance of token bus LAN with petri nets, Zhenggang Pan, May 1992
Electrical and Computer Engineering
Recalcitrance of polychlorinated biphenyls to biodegradation by phanerochaete chrysosporium in soil, Thierry B. Poncet, January 1992
Chemistry and Environmental Science
Design for quality manufacture : formulation of the macro architecture for a DFQM methodology, Shrad Prasad, May 1992
Mechanical and Industrial Engineering
The poetic streetscape, Joan Wegman Profeta, May 1992
New Jersey School of Architecture
Quantitative assessment of myocardial oxygen supply and demand using a dynamic model of the cardiovascular system, Badrinath R. Puranic, October 1992
Biomedical Engineering
Optimization of a 3-micron BCCD process for high density CCD registers, Mark Ratner, May 1992
Electrical and Computer Engineering
Errors in constant-velocity shaft couplings, Philip M. Remington, October 1992
Mechanical and Industrial Engineering
Biodegradation of phenol and benzoic acid in batch and sequencing batch reactors, Stephane Reynaud, January 1992
Chemical and Materials Engineering
Bacterial biosorption of heavy metals from liquid wastestreams, Emilia Rus, October 1992
Chemistry and Environmental Science
Development of the interface between CAD and waterjet NC systems, Sivayasivan Sambandan, October 1992
Mechanical and Industrial Engineering
The design and manufacture of institutional trays using simultaneous engineering, Antonio Schmidt, October 1992
Mechanical and Industrial Engineering
Computation of collision parameters of spheres by computer vision, Sumit Sen, October 1992
Mechanical and Industrial Engineering
Three-dimensional beam-columns, Mohammad Hassan Shams, October 1992
Civil and Environmental Engineering
Comparing techniques of mapping pyramid algorithms onto the hypercube : a case study for the connection machine, Muhammad Ali Siddiqui, May 1992
Electrical and Computer Engineering
Application of desktop manufacturing system (SLA) for the manufacturing of a centrifugal pump impeller using CAD (I-DEAS), Wasimuddin Azam Muhammad Syed, October 1992
Mechanical and Industrial Engineering
Domain analysis within the GenSIF framework, Heiko Thimm, October 1992
Informatics
Modeling, evaluation, and control of a flexible manufacturing cell using petri nets, Glenn Arthur Thorniley, October 1992
Mechanical and Industrial Engineering
Mineralization of 2-chlorophenol using a hollow fiber ultrafiltration system in combination with a reactor containing an immobilized white rot fungus, Sheau-Ming Tung, October 1992
Chemical and Materials Engineering
Catalytic ozone/ultraviolet light oxidation of organics in water : integrated charcoal/ozonation/UV radiation, Dawei Wang, October 1992
Civil and Environmental Engineering
Searching for orthogonal states of neural networks, Heng Wang, January 1992
Informatics
Influence of fly ash and chromium characteristics on compressive strength of mortar and concrete, Lin Wang, May 1992
Chemistry and Environmental Science
New algorithms for mid-crack codes in image processing, Wai-Tak Wong, May 1992
Informatics
Decomposition of geometric-shaped structuring elements and optimization on euclidean distance transformation using morphology, Hong Wu, May 1992
Informatics
Ultrasonic ranging system for gait analysis, Mu Wu, May 1992
Biomedical Engineering
Synthesis of bisphenol a BIS-2-hydroxypropylmethacrylate (BISGMA) and diethylchlorophosphate and 2-hydroxyethylmethacrylate (DECP-HEMA) and preparation of dental adhesives, Da Xie, October 1992
Chemistry and Environmental Science
Design and implementation of two text recognition algorithms, Madhumathi Yendamuri, October 1992
Informatics
Character recognition using string matching, Xiaozhi Ye, October 1992
Informatics
The use of Henry's law constants in the determination of factors that influence VOC concentration in aqueous and gaseous phases in wastewater treatment plant, Hui-Zhi Yu, May 1992
Chemistry and Environmental Science
I: Reaction of CH3C1 with H2 and CH4 under oxidation and pyrolysis conditions II: Kinetic analysis of C2H6, C2H4, and C2H2 reactions with OH, O, H, and Cl, Qing-Rui Yu, May 1992
Chemistry and Environmental Science
A new method to optimize the satellite broadcasting schedules using the mean field annealing of a neural network, Youyi Yu, May 1992
Electrical and Computer Engineering
An embedded controller-based fiber optic sensor for use in fresh concrete, Zhaowu Zhang, May 1992
Electrical and Computer Engineering
Determination of pentachlorophenol in wood and leachate from discarded treated wooden poles, Yan Zha, October 1992
Chemistry and Environmental Science
Bragg reflection grating waveguide, Wei Zhong, October 1992
Electrical and Computer Engineering
Quantitative measurement of pyrolysis and combustion species concentration by molecular-beam-sampling-mass-spectrometry, Xian Zhong, October 1992
Physics
Effect of 2,3-Butanedione monoxide on whole-cell potassium channel currents in rat single myocytes, Youliang Zhou, May 1992
Biomedical Engineering
Modification, reimplementation and studies using the meisner model of the heart, Ari Zvi Zivotofsky, August 1992
Electrical and Computer Engineering
Instrumentation for the characterization of 10 micron focal plane array detectors, Zhen Zong, October 1992
Physics
Theses from 1991
N-cross coupled phase locked loops, Joseph C. Aboukhalil, January 1991
Electrical and Computer Engineering
Work-preserving real-time emulation of meshes on butterfly networks, Alf-Christian Achilles, August 1991
Computer Science
Analysis of the influence of natural wear and tear in gates and runners on the filling of a balanced multi-cavity injection mold, Ranga Reddy V. Adavelly, May 1991
Mechanical and Industrial Engineering
Fault tolerant clos network, Preet Mohan S. Ahluwalia, January 1991
Electrical and Computer Engineering
3-D structure recovery using unified optical flow field approach, Anees Ahmad, May 1991
Electrical and Computer Engineering
Frictional resistance of geotextiles, Md. Khairul Alam, December 1991
Civil and Environmental Engineering
Direct Schottky injection image sensors, Subramanyam V. Ayyagari, January 1991
Electrical and Computer Engineering
A comparative analysis of the efficacy of zero-order, first-order and Monod kinetic models in representing raw aerobic biodegradation data, Andrew I. Bakun, June 1991
Chemical and Materials Engineering
Performance analysis of symbol timing recovery circuits employed in digital communications systems, Elisha Yegal Bar-Ness, May 1991
Electrical and Computer Engineering
The design and testing of a personal computer controlled scanning acoustic microscope for orthopaedic surgical applications, Hubert Heinrich Berndt, May 1991
Electrical and Computer Engineering
Off-line programming using IGRIP, Narahari K. Bhandary, May 1991
Mechanical and Industrial Engineering
Synthesis and characterization of LPCVD silicon carbide thin films for x-ray lithography, Mahalingam Bhaskaran, May 1991
Electrical and Computer Engineering
Development of an adaptive fuzzy shell clustering algorithm and validity measures, Kurra Bhaswan, May 1991
Mechanical and Industrial Engineering
Experiments with the gap variation of interpolation search for semi uniform distributed alphabetic files, Jatin M. Bhavsar, May 1991
Computer Science
Electroretinogram modeling : parameter identification and intensity-response function fits, Juan J. Castro, May 1991
Electrical and Computer Engineering
Disc size scale-up in rotating biological contactor system, Chi-Sheng Chang, October 1991
Civil and Environmental Engineering
Multiresolution techniques : Laplacian pyramid coding and its comparison with subband coding, Danmei Chang, January 1991
Electrical and Computer Engineering
The performance of training pattern sets in a new ART-based neural architecture for image enhancement, Fu-Chun Chang, May 1991
Informatics
Centrifugal modeling of leaking underground storage tanks, Kuo-neng George Chang, January 1991
Civil and Environmental Engineering
Fast packet switching for B-ISDN with neural net control, Ajit K. Chaudhuri, January 1991
Electrical and Computer Engineering
Graphical user interface for image processing, Kumar Chebrolu, May 1991
Computer Science
A machine vision system with remote host, Chieyeon Jason Chen, January 1991
Electrical and Computer Engineering
A mouse-driven interface for Androx ICS-400, Chin-Tien Chen, May 1991
Electrical and Computer Engineering
An implementation of bionomial-QMF for subband coding of speech, Feng Chen, December 1991
Electrical and Computer Engineering
Multistage interconnection networks : improved routing algorithms and fault tolerance, Kuo-Yu Chen, May 1991
Electrical and Computer Engineering
Burn wound healing evaluation by infrared imaging, Shang-Yuan Chen, May 1991
Biomedical Engineering
Simulation and modeling of kinetics of silicon oxidation in the thin oxide regime, Tirthankar Dutta, December 1991
Electrical and Computer Engineering
Biomass conversion of solid-waste (newsprint) into a clean fuel (ethanol) by enzymic hydrolysis and fermentation, Nimesh V. Gandhi, December 1991
Chemistry and Environmental Science
Redesign of parts and simulation of flexible assembly cell for safety water shower assembly, Balraj Y. Gardilla, December 1991
Mechanical and Industrial Engineering
Acid recovery of cadmium and lead from immobilized activated sludge used to biosorb metals, Chandrakanth Hartman, May 1991
Chemistry and Environmental Science
Charcoal catalyzed ozone decomposition of organic pollutants in water, Kin Ho, May 1991
Chemical and Materials Engineering
The effects of oxygen tension on nitrate reduction by pseudomonas isolate, Hao-Jan Hsing, December 1991
Chemistry and Environmental Science
Size reduction of polymeric particulates by jet milling, Cheng Hua, May 1991
Mechanical and Industrial Engineering
Conditional artificial dielectrics ; fabry-perot etalon, Ling-Yi Hu, December 1991
Electrical and Computer Engineering
Software development for analysis of stochastic petri nets using transfer functions, Aman U. Jamwal, December 1991
Electrical and Computer Engineering
Analytical methodology for ATM control panel design, Donald C. Johnson, December 1991
Mechanical and Industrial Engineering
Implementation of automated assembly, Kang H. Kong, May 1991
Mechanical and Industrial Engineering
Biological coal desulfurization, Ming Le, May 1991
Chemistry and Environmental Science
Experiments in aerobic and anaerobic biodegradation of trichloroethylene, Qiong Liao, December 1991
Chemistry and Environmental Science
Task scheduling for FMS based on genetic algorithm, Hung-Yuan Li, May 1991
Electrical and Computer Engineering
Image enhancement and analysis of leukocyte adhesion, Yee-Ruh Lin, May 1991
Biomedical Engineering
A parallelogram four-frame model in 3-D motion and structure recovery using unified optical flow field approach, Zhichun Lin, May 1991
Electrical and Computer Engineering
Solid-liquid suspension in agitated vessels provided with multiple impellers, Tong Li, January 1991
Chemical and Materials Engineering
Biodegradation of Diflufenican using anaerobic microbial consortia, Velukumar T. Nanjagowder, August 1991
Chemistry and Environmental Science
Design for assembly : re-design of an electrical switch for the ease of automatic assembly, Achyuta Reddy Pannala, May 1991
Mechanical and Industrial Engineering
Petri net modeling and analysis of an FMS cell, Paresh A. Patel, May 1991
Mechanical and Industrial Engineering
Development of a classification and coding system for computer-aided process planning, Shilpan K. Patel, May 1991
Mechanical and Industrial Engineering
Simulation of voice and data integration, Urmila S. Patel, May 1991
Electrical and Computer Engineering
Liquid-vapor equilibria and Henry's law constants for volatile organics in surfactants, Qianping Peng, May 1991
Chemistry and Environmental Science
Methods development for determination of trace polar volatile organics in environmental samples, Qingchu Peng, May 1991
Chemistry and Environmental Science
Computer-aided process planning (CAPP) SORICH, Sohail Pirzada, December 1991
Mechanical and Industrial Engineering
A study in systems integration architecture, Sashidhar M. Prasad, December 1991
Computer Science
Dynamic analysis of the generalized slider crank, Sahidur Rahman, May 1991
Mechanical and Industrial Engineering
Design for manufacturability : re-design of pencil sharpener for the ease of assembly, Amit R. Rathod, May 1991
Mechanical and Industrial Engineering
Performance evaluation in terms of congestion and flow control of interconnected token ring local area networks, Muhammad Salim Raza, May 1991
Electrical and Computer Engineering
Analysis of chemical contaminants in tissue samples from two species of fish, Michael David Reive, January 1991
Chemistry and Environmental Science
Direct recovering of surface structure characterized by an Nth degree polynomial equation using the UOFF approach, Mazen A. Salhi, October 1991
Electrical and Computer Engineering
Error detection and correction in compressed data, Nadir Sezgin, December 1991
Electrical and Computer Engineering
Biodegradation of styrene in a recirculation reactor using immobilized activated sludge, Shreyans Dilip Shah, May 1991
Chemistry and Environmental Science
Effect of shrinkage on the design and manufacture of plastic parts in injection molding using CAD/CAM techniques, Deepak M. Shastri, May 1991
Mechanical and Industrial Engineering
Adiabatic kinetic studies of the cytidine/acetic anhydride reaction by utilizing temperature versus time data, Joseph John Shatynski, May 1991
Chemical and Materials Engineering
Low pressure chemical vapor deposition (LPCVD) of silicon carbide from diethylsilane, Yi-Tong Shi, August 1991
Chemistry and Environmental Science
Experiments in aerobic and anaerobic biodegradation of methylene chloride using activated sludge, Vivek Chandrakant Sinkar, May 1991
Chemistry and Environmental Science
Design for manufacturability, Kocherlakota Sreedhar, May 1991
Mechanical and Industrial Engineering
Preparation and testing of novel dental adhesives based on Bis- GMA/TEGDMA monomer system, Deyun Sun, May 1991
Chemistry and Environmental Science
The application of adaptive step-size control in the numerical simulation of calcium release in vascular smooth muscle, Michael John Sydor, May 1991
Biomedical Engineering
Investigations of substitution of Bi and Tl for rare earth elements in superconducting RBa2Cu3Oy, Jian Tang, January 1991
Chemistry and Environmental Science
Isolation and characterization of a crude extracellular phenol oxidase from a recirculation bioreactor, Yun Tang, May 1991
Chemistry and Environmental Science
A study of biological dentrification of munition wastes, Sonia R. Venugopal, January 1991
Chemical and Materials Engineering
Performance evaluation and comparison of ordinary, adaptive and exhaustive services in the token ring network, Hong Wang, May 1991
Electrical and Computer Engineering
Biodegradation of phenol and 4-chlorophenol using a single species in a sequencing batch reactor, Kung-Wei Wang, October 1991
Chemical and Materials Engineering
Catalytic oxidation of trace concentrations of chlorinated hydrocarbons over 1.5% platinum on alumina/monolith, Yi Wang, May 1991
Chemistry and Environmental Science
Coexistence of three pure and simple competitors in four interconnected bioreactors, Ming Wu, January 1991
Chemical and Materials Engineering
EEG data compression, Yun-Chu Wu, May 1991
Biomedical Engineering
Decomposing non-product form queueing lattices through autorouting with A* algorithm, Chun-Chang Yu, January 1991
Electrical and Computer Engineering
Measurement of the removal of selected VOCs from a municipal treatment plant, Hong Yu, December 1991
Chemistry and Environmental Science
Catalytic oxidation of chlorinated compounds over PdO/Al2O3 on a monolith, Tai-Chiang Yu, May 1991
Chemical and Materials Engineering
Microwave treatment of hazardous wastes : chemical fixation of insoluble non-volatile, chemically non-reactive organics in soil, Naihong Zhu, April 1991
Chemistry and Environmental Science
Theses from 1990
Estimating 3-D motion and structure parameters of a rigid planar object by establishing landmark correspondences, Herman Agustiawan, December 1990
Electrical and Computer Engineering
Comparative analysis of single and double dwell acquisition schemes, Gurinder Singh Ahluwalia, August 1990
Electrical and Computer Engineering
Interconnection of X.25 networks, Syed Ayaz Qutubuddin Ahmed, May 1990
Electrical and Computer Engineering
Design of a microengineered pressure sensor, Ranjeet Alexis, August 1990
Electrical and Computer Engineering
The accreditation of professional-technician occupations, Michael William Allgaier, May 1990
School of Management
Wideband microstrip antenna optimization, Amer Muhammad Alsawadi, December 1990
Electrical and Computer Engineering
Investigation of mixed-made fracture in concrete, Stylianos C. Aniftos, May 1990
Civil and Environmental Engineering
Simulation based modeling and scheduling of a generalized flow- line, Srinivas Anne, December 1990
Mechanical and Industrial Engineering
A stereo vision technique based on the multi-positioned camera criterion, Jie Bao, May 1990
Electrical and Computer Engineering
A comparative study of cadmium uptake by cells of gram-positive and gram-negative bacteria, Shubhangi Rajan Bhende, May 1990
Chemistry and Environmental Science
Trends of metals (Pb, Zn, Cd, Cr, Mn, Fe, Hg and Ni) concentration in the New Jersey air environment, Shobha R. Boddu, May 1990
Chemistry and Environmental Science
Impacts of treated municipal waste-waters on development and growth of Hudson-Raritan estuary fishes, Chien-Min Chen, May 1990
Chemistry and Environmental Science
Studies of Nitro-PAH on ambient air particulate matter, Yadan Wang Chen, January 1990
Chemistry and Environmental Science
Quantitative determination of formaldehyde in ambient air, Wen-Shao Chou, January 1990
Chemistry and Environmental Science
Multiphase solid-liquid-liquid mixing in stirred tanks, George R. DeRitter, May 1990
Chemical and Materials Engineering
A comparative study of edge detection techniques, Jaskaran Singh Dhaliwal, May 1990
Mechanical and Industrial Engineering
The oxidation of methylene chloride over manganese dioxide catalyst, Jun Du, May 1990
Chemistry and Environmental Science
Biodegradation of hexachlorocyclohexane in sand and wastewater using immobilized phanerochaete chrysosporum, Ajaykumar C. Gami, December 1990
Chemical and Materials Engineering
Biodegradation of polymers and isolation and crude characterization of proteins from these studies, Sunil S. Godbole, May 1990
Chemistry and Environmental Science
Benzo(a)pyrene ingested from composite meals : analysis and method development related to total human exposure, Che-Han Hsu, January 1990
Chemistry and Environmental Science
Adaptive stack filtering by LMS and perceptron learning, Yu-chou Huang, December 1990
Electrical and Computer Engineering
Synthesis and study of polymers containing inorganic ions, Lateef Aderoju Ibikunle-Sofoluwe, January 1990
Newark College of Engineering
X-ray powder diffraction, scanning electron microscopy and energy dispersive spectroscopy studies of soil containing chromium immobilized by microwave treatment, Nagui Ibrahim, May 1990
Chemistry and Environmental Science
Integrated component-based computer design modeling system : the implications of the representation of control parameters on the design process, Allen D. Jablonski, December 1990
New Jersey School of Architecture
Multiprocessor system design tutor : expert system approach, Rakesh Kamdar, May 1990
Electrical and Computer Engineering
Modeling a fuel rich premixed laminar methane flame OH, CH, NH, CN profiles, including prompt NO, Md. Hasan Ul Karim, October 1990
Chemical and Materials Engineering
An investigation of the dynamics of abrasive waterjet formation, Md. Ekramul Hasan Khan, May 1990
Mechanical and Industrial Engineering
Office technology : a determinant in the organization of spaces, Se Hun Kim, January 1990
New Jersey School of Architecture
Biodegradation of phenol by two competing microbial species in a sequencing batch reactor, Yoo-Suk Ko, May 1990
Chemical and Materials Engineering
Control of stress in silicon nitride thin films, Ajay Krishnan, May 1990
Electrical and Computer Engineering
Token bus LAN performance : modeling and simulation, Ramesh Kurnool, May 1990
Electrical and Computer Engineering
Thermal desorption of hazardous and toxic organic compounds from sand matrices, Jaeil Kwon, May 1990
Chemistry and Environmental Science
Stabilization/solidification of organic containing wastes using organophilic clay and coal fly ash, Edith Lagoutte, December 1990
Chemistry and Environmental Science
Application research on wastewater reuse for petrochemical refining industry in Taiwan, Lih-Shyan Lee, January 1990
Civil and Environmental Engineering
Experimental evaluation of process zone deformation in concrete, Cherng-Maou Meng, May 1990
Civil and Environmental Engineering
Mathematical modeling and simulation of the progression of AIDS, Anju H. Nagpal, May 1990
Biomedical Engineering
Simulation of random packing of hard spheres using Monte Carlo method, Sung-Ho Park, May 1990
Mechanical and Industrial Engineering
Performance evaluation and comparison of ordinary, adaptive and exhaustive service in the token ring network, Darshakkumar J. Patel, May 1990
Electrical and Computer Engineering
Construction cost estimating in project management, Kalpit N. Patel, May 1990
Civil and Environmental Engineering
Dioxin formation : thermodynamics and reaction pathways during the oxidation/incineration of chloroaromatics, Sanjiv Narendra Patel, January 1990
Chemical and Materials Engineering
EEG mapping using the personal computer, Zhuan-Zhang Pei, May 1990
Electrical and Computer Engineering
Trends of EOM, B(a)P, sulfates, and nitrates in air-borne particulate matter in eleven proximate locations in New Jersey during 1988, Sathish Pushpala, December 1990
Chemistry and Environmental Science
Recycling: Separation of major thermoplastics from postconsumer plastics stream, Rafael A. Rodriguez, September 1990
Chemical and Materials Engineering
Mathematical modeling and computer simulations of biodenitrification in batch and sequencing batch reactors, Sugata Sanyal, May 1990
Chemical and Materials Engineering
Design and analysis of movable boundary allocation protocol, Karun Sekhri, May 1990
Electrical and Computer Engineering
Statistical process control for high precision deep drawn sheet metal parts, Sunil S. Shah, May 1990
Mechanical and Industrial Engineering
Synthesis of strained lactams and study of their energetics and bonding, Jung-Chou Tsai, January 1990
Chemistry and Environmental Science
Degradation of refractory organic pollutants in tar, water and soil matrices by ozone or hydrogen peroxide with ultraviolet light, Liang-Jiun Uang, January 1990
Chemistry and Environmental Science
An artificial neural network for redundant robot inverse kinematics computation, Wibawa Utama, May 1990
Electrical and Computer Engineering
A study of the effects of weighting matrices in power system state estimation, Yanshi Wang, May 1990
Electrical and Computer Engineering
A comparison of integrated and differential estimates of flourescent intensity profiles using digital video image analysis, Langfang Wu, May 1990
Biomedical Engineering
The kinetics and mechanism of photo-oxidation of acrylonitrile and acetonitrile with hydrogen peroxide and ozone in wastewater, Jung-Yuan Yeh, January 1990
Chemistry and Environmental Science
Design of a real time optical sensor for continuous blood cell separation, Girish S. Yerande, May 1990
Electrical and Computer Engineering
Preparation and testing of novel blocked isocyanate dental adhesives based upon hydroxyhexylmethacrylate, Yunwen Ye, December 1990
Chemical and Materials Engineering
Kinetic mechanism of the reactions of dichloromethane and chloroform with atomic hydrogen at low pressure and room temperature, Jia-Ling Linda Young, January 1990
Chemical and Materials Engineering
Theses from 1989
Competitive bidding strategy in the construction industry : a game theoretic approach, Hongbin Chen, May 1989
Civil and Environmental Engineering
A study of the effect of some inhibitors on the corrosion rates of austenitic stainless steels in sulfuric acid, Shang-Yinn Chiou, May 1989
Chemical and Materials Engineering
Substituent effects on strained rings. part A ; The kinetics of hydrolysis of A quinuclidone using FTIR. part B, Yeu-Yi Chiu, May 1989
Chemistry and Environmental Science
Design of a gear driven anti-twister mechanism for a seal-less blood processor, Ajit Nachiket Dastane, May 1989
Mechanical and Industrial Engineering
Microwave treatment of organic contaminated soil, Suning Fan, May 1989
Chemistry and Environmental Science
Microbial competition in the biodegradation of phenol, Mary Ellen Frank, May 1989
Chemistry and Environmental Science
A study of volatile organic compound emissions in the ambient air of a sanitary landfill in Richard W. DeKorte State Park, New Jersey, Minsen Gao, May 1989
Chemical and Materials Engineering
The influence of aggregate grading with two different binders on mechanical strength of polymer concrete, Pei-Yuan Gao, January 1989
Chemical and Materials Engineering
Rays and beams near the shadow boundary, Weixing Gao, May 1989
Electrical and Computer Engineering
Towards a theory of planning aesthetics : application to university commons, Newark, Kathy M. Gonzalez, August 1989
New Jersey School of Architecture
High temperature resistant crosslinked phenol, o-chlorophenol and formaldehyde copolymer fiber, Suh Joon Han, May 1989
Newark College of Engineering
Reactor design for hazardous waste treatment using immobilized phanerochaete chrysosporium, Ikram ul Haq, May 1989
Chemical and Materials Engineering
A comparison study between the tenax trap and the canister collection methods for determination of volatile organic compounds, Li-Ching Lillian Hung, September 1989
Chemistry and Environmental Science
Application of microwave energy to remediation of soils contaminated with chromium, Chih-Ju Jou, May 1989
Chemical and Materials Engineering
A computer program on the economics of collection and sortation of recyclable materials in municipal solid wastes, Ara Nigogos Kahyaoglu, May 1989
Chemical and Materials Engineering
Statistical multiplexing of video sources for packet switching networks, Krishna Kancherla, May 1989
Electrical and Computer Engineering
A robot vision system for determining 3-D coordinates of object points, Tea-Quin Kim, May 1989
Mechanical and Industrial Engineering
Reduced complexity receivers for trellis coded modulations via punctured trellis codes, Bonchul Koo, May 1989
Electrical and Computer Engineering
Mathematical model of a continuous sterilization system for fermentation media containing suspended solids, Mark A. Leskowicz, May 1989
Chemical and Materials Engineering
Organics in ambient air by collection on tenax, thermal desorption,and capillary chromatography with parallel FID/ECD analysis, Chih-Hsiang Liao, May 1989
Chemistry and Environmental Science
Recirculation flow bioreactor for the synthesis of nitroxide and n-oxide pharmaceuticals, Douglas Lischick, May 1989
Chemical and Materials Engineering
Determination of benzo(a)pyrene metabolites in the bile of winter flounder from the New York Bight, Xingmin Liu, May 1989
Chemistry and Environmental Science
Integrated voice/data services on multihop radio networks, Chialun Lu, May 1989
Electrical and Computer Engineering
Investigation of major mutagenic substances in airborne particulate matter : biologically-driven analysis of fractions and analysis of polycyclic aromatic hydrocarbons (PAHs) nitro-PAHs and other classes of compounds, Jung-Hen Lwo, May 1989
Chemistry and Environmental Science
Application of microwave technology to effect on-site regeneration of GAC, K.C. Mahesh, December 1989
Chemistry and Environmental Science
Schottky-barrier solar cells, surface patterning for efficient light collection, Constantinos Manolis, May 1989
Electrical and Computer Engineering
Agitation requirements for complete drawdown of floating solids in stirred tanks, Joseph Philemon Mmbaga, September 1989
Chemical and Materials Engineering
Management of construction jobsite productivity : a self assessment approach, Nicos Poliviou Nicolaou, May 1989
Mechanical and Industrial Engineering
Thermal desorption of hazardous and toxic organic compounds, Manuel S. Nolau, May 1989
Chemistry and Environmental Science
Study of an analytical method for benzo(a)pyrene metabolites in human urine, Zheng Ouyang, May 1989
Chemistry and Environmental Science
Toward a model of instruction for architecture design studio, Garry Allen Perryman, October 1989
New Jersey School of Architecture
First impression : the study of entry in architecture, Siriwan Polpuech, August 1989
New Jersey School of Architecture
Thermodynamic and leaching studies of various systems, Satya D. Rami, January 1989
Chemical and Materials Engineering
Surfactant enhanced scrubbing in an ejector venturi scrubber of sulfur dioxide from air exhaust streams, Humberto Roman, May 1989
Civil and Environmental Engineering
pH parametric pumping : an examination of different feed locations for a two and three column process with the same flow patterns and pH distribution, Roberta Rosty, May 1989
Chemical and Materials Engineering
Computer controlled oxygen bioreactor, Dinesh Sachdeva, May 1989
Electrical and Computer Engineering
The evaluation of polysulfone composites as structural implants in orthopaedic surgery, Howard L. Scalzo, May 1989
Biomedical Engineering
Scanning electron microscopy and X-ray energy dispersive spectroscopic analysis of selected sorbent materials, Elhamy Amin Sedhom, May 1989
Newark College of Engineering
Process modelling of the nitration of toluene, Nitin K. Shah, September 1989
Chemical and Materials Engineering
Molecular modeling in anatoxin and other semirigid agonists, Wen-chung Shang, January 1989
Newark College of Engineering
Prediction and correlation of liquid-liquid equilibria, Jose Simonetty Jr., May 1989
Chemical and Materials Engineering
Characterization of activated sludge immobilized in calcium alginate gel with respect to biodegradation of 2-chlorophenol and benzene, Manjari Singh, May 1989
Chemistry and Environmental Science
Estimation of thermodynamic properties of petroleum fractions to supplement the ASPEN simulator, Steven E. Sund, May 1989
Chemical and Materials Engineering
Adsorption and desorption of chromium on clayey soils, Ker-Shu Tan, May 1989
Civil and Environmental Engineering
Environmental impact assessment for water resources projects : planning procedure and analytical methods, Mahadesh C. Tumkur, May 1989
Civil and Environmental Engineering
A study of employee alcohol and drug abuse programs, Phyllis E. Waters, May 1989
School of Management
Analysis of C2 and C3 hydrocarbons in ambient air. Part 1 ; Development of simple analysis for polycyclic aromatic hydrocarbons. Part 2, Li-Li Wu, September 1989
Chemistry and Environmental Science
Study of acetone extractable organic matter from airborne particulate matter from an urban site, Wenhui Wu, September 1989
Chemistry and Environmental Science
Thermal decomposition of 1,1,1-thrichloroethane-methane-oxygen mixture in tubular flow reactor, Yo-Ping Wu, May 1989
Chemical and Materials Engineering
Aqueous absorption of NOx induced by sodium chlorite oxidation, Chen-Lu Yang, December 1989
Chemistry and Environmental Science
Thermal decomposition of chlorobenzene reaction with hydrogen and oxygen mixture in an atmosphere, Chun-Chen Yang, September 1989
Chemical and Materials Engineering
Synthesis of highly-strained gem-difluoro compounds by reaction of difluoromethylene with cycloalkenes, Deyi Yang, May 1989
Chemistry and Environmental Science
Thermal decomposition of 1,1,2- trichloroethane in hydrogen in tubular flow reactors at atmospheric pressure, Chen-Chung Yeh, May 1989
Chemistry and Environmental Science
A non-invasive technique for burn area measurement, Jong-Daw Yu, May 1989
Biomedical Engineering
Computerize data information for architecture design, Syau-yi Yu, August 1989
New Jersey School of Architecture
Environmental assessment in bioethanol technology using immobilized yeast cells, Minoo Kandy Zarnegar, January 1989
Chemistry and Environmental Science
Theses from 1988
Study of the structure and capacity of construction industry in Pakistan, Tayyab A. Ansari, May 1988
Civil and Environmental Engineering
Planning design change : focus on Ottawa, Illinois, Donna Jean Carney, September 1988
New Jersey School of Architecture
Determination of polycyclic aromatic hydrocarbons from incineration emission samples, Robert Cebula, May 1988
Chemical and Materials Engineering
A dynamic model of a fill-and-draw reactor and its implications for hazardous waste treatment, Shing-Hwa Chang, May 1988
Chemical and Materials Engineering
Analysis of C2 and C3 hydrocarbons in ambient air. Section I ; Identification and quantification of volatile organics emitted from a landfill. Section II, Tsong-Sheng Chang, September 1988
Chemistry and Environmental Science
Thermal desorption of hazardous and toxic organic compounds from soil matrices : dichloromethane, chloroform, benzene, toluene, 1-chloronaphthalene, 1, 2, 4-trichlorobenzene, Arun S. Chemburkar, January 1988
Civil and Environmental Engineering
Investigation of different CMOS DRAM sense amplifier configurations in VLSI, Bihju Chiu, May 1988
Electrical and Computer Engineering
A study on the poly(ethylene terephthalate)/flouropolymer blends, Chyan-nin Chiu, September 1988
Chemical and Materials Engineering
Softening response of concrete in direct tension, Teresa Cintora, May 1988
Civil and Environmental Engineering
Modeling and simulation of robot arms with flexible links, John G. Danis, May 1988
Electrical and Computer Engineering
Wastewater treatment : phenol extraction by liquid membrane, Jan-Ming Hou, May 1988
Chemical and Materials Engineering
Determination of aromatic amines by diazonium salt, Hong-hue Hsu, September 1988
Newark College of Engineering
A silicon photodiode array for soft x-ray sensing, Chih-te Hu, May 1988
Electrical and Computer Engineering
Synergistic fillers in polymer concrete : new composites, Syed Hassan Javed, May 1988
Chemical and Materials Engineering
Adsorption and kinetics of adsorption by flyash in solution, Murthy K. Jogimahanti, May 1988
Chemistry and Environmental Science
An investigation of electrical and optical properties of reactively sputtered silicon nitride and amorphous hydrogenated silicon thin films, Tae Hoon Kim, May 1988
Electrical and Computer Engineering
System performance criteria in CDMA networks using gold codes, Yong H. Kim, May 1988
Electrical and Computer Engineering
Microbial phenol degradation utilizing a complete-mix biological reactor : the effects of dissolved oxygen content, Keith Kollar, May 1988
Chemistry and Environmental Science
A dynamic model of fill-and-draw reactor utilizing an inhibitory substrate, Yun-Fei Ko, December 1988
Chemical and Materials Engineering
Bead design for biodegradation of 2-chlorophenol using microorganisms entrapped in alginate gel, Fayaz Lakhwala, May 1988
Chemical and Materials Engineering
A study of human exposure to benzo(a)pyrene (BAP) through different pathways. Part A ; Assessment of benzo(a)pyrene (BAP) exposure through urine analysis with the hydriodic acid reduction reaction. Part B, Shao-Keng Liang, September 1988
Chemistry and Environmental Science
Investigation of forces in the course of the water jet--work piece interaction, Hung-Yuan Li, May 1988
Mechanical and Industrial Engineering
Synthesis and characterization of a novel blocked isocyanate dental adhesive based on diphenylmethane - 4, 4' - diisocyanate, Yangming Lin, January 1988
Chemical and Materials Engineering
Recycled plastics as fillers in polymer cement concrete composites, Shian-Jong Liu, May 1988
Chemical and Materials Engineering
Comparative adsorption studies on clay soils, Prasanna R. Mysore, January 1988
Civil and Environmental Engineering
High-energy, curable polycyclopentadiene binder for solid rocket propellants, Jian guo Ning, September 1988
Chemical and Materials Engineering
On conventional and harmonic load flow analysis, Ranjit B. Pradhan, May 1988
Electrical and Computer Engineering
Design of a fiber optic oxygen sensor based on immobilized hemoglobin, Mendu Govind Raj, May 1988
Electrical and Computer Engineering
Programming for the prediction of thermodynamic phenomena, One Kwon Rim, January 1988
Chemical and Materials Engineering
The architecture of automobile and building design : learning from 100 years of parallel processes, Vojislav Ristic, September 1988
New Jersey School of Architecture
Use of recirculation reactor to study biodegradation of Aroclor 1242, a polychlorinated biphenyl, Babu S. Sanji, May 1988
Chemistry and Environmental Science
A modified extended kalman filter as a parameter estimator for linear discrete-time systems, Bruno Johannes Schnekenburger, January 1988
Electrical and Computer Engineering
Hydrodechlorination reactions of trichloroethylene and 1,1 1, trichloroethane over alumina supported palladium catalysts, and, trichloroethylene over nickel catalyst, Atul R. Shah, January 1988
Chemical and Materials Engineering
An improved method of gas chromatographic determination of trace organic vapors in ambient air collected in canisters, Yong-jin Shen, May 1988
Civil and Environmental Engineering
Sorptive and geotechnical characteristics of kaolinite, Chi-Yuan Shih, May 1988
Civil and Environmental Engineering
A model for the determination of market based pricing of telecommunication products, Katherine J. Sullivan, May 1988
Mechanical and Industrial Engineering
Oxidation of N,N-Dimethylformamide and N,N-Dimethylacetamide in a photoreactor, Su-Jen Syu, January 1988
Chemistry and Environmental Science
Pentachlorophenol and oxygen consumption of immobilized mixed bacterial culture, Tesfamariam Stephanos Tsadwa, May 1988
Chemistry and Environmental Science
Agitation requirements for complete dispersion of emulsions, Dun-Huang Tsai, May 1988
Newark College of Engineering
An analysis of the dense packing of disks : a computer simulated approach, Jir-Yih Tsaur, May 1988
Mechanical and Industrial Engineering
Synthesis of strained bridgehead lactams, Quansing Tu, May 1988
Chemistry and Environmental Science
Detection and determination of N-Nitrosohexamethyleneimine in benzenesulfonamide, N-[[(hexahydro-1-H azepin-1-YL)amino]-carbonyl]-4 methyl by HPTLC, Anulfo A. Valdez, May 1988
Chemistry and Environmental Science
Biosynthesis of amine oxides using calcium-alginate immobilized hog liver microsomes : an evaluation of process and reactor design, Ioannis I. Valvis, May 1988
Chemical and Materials Engineering
A new hazardous waste treatment technology utilizing low power density microwave energy, Gabriele Else Windgasse, May 1988
Chemistry and Environmental Science
Thermal decomposition of dichloromethane/1,1,1-trichloroethane mixture in an atmosphere of hydrogen, Yang Soo Won, September 1988
Chemistry and Environmental Science
Use of recirculation reactor to study biodegradation of 2-chlorophenol, Kai-Chung Yang, May 1988
Chemical and Materials Engineering
Formation of light hydrocarbons and soot in the pyrolysis reactions of chloro, dichlorobenzene, acetylene and benzene in an atmosphere of hydrogen, Larry Jiyuan Zhu, September 1988
Chemical and Materials Engineering
Preconcentration and direct flame ionization method for measurement of non-methane organic compounds in ambient air and statistical analysis of experimental data, Lianyi Zuo, May 1988
Chemistry and Environmental Science
Theses from 1987
Approaches to the synthesis of dentin bonding agents containing vinyl and carbamate functional groups, Steven W. Amato, September 1987
Newark College of Engineering
Studies directed toward beta-cyclodextrin and capped beta-cyclodextrin mimics of alpha-chymotrypsin, Preston Marlon Canzius, May 1987
Chemical and Materials Engineering
Steady-state operation of bench-scale activated sludge process using phenol and 2-chlorophenol as substrates, Jeffrey Richard Caputi, January 1987
Civil and Environmental Engineering
The degradation of trace pollutants in wastewater, Christine M. Cheng, May 1987
Civil and Environmental Engineering
Theoretical studies of a norbornane mimic of acyl-alpha-chymotrypsin, Pin-Nan Chen, May 1987
Chemical and Materials Engineering
Hydrodechlorination reactions on silica-supported rhodium catalysts, Yung-Ming Chen, May 1987
Chemical and Materials Engineering
Properties of sputtered a-Ge and a-Ge : H thin films, Hanjin Cho, May 1987
Electrical and Computer Engineering
Establishing and utilizing the concept of socio-technical-spatial systems in the 21st century work environment, Asmita Gami, September 1987
New Jersey School of Architecture
Separation of chromium from waste sludges by an electric membrane process, Freeman Nai-Tchun Ho, May 1987
Chemical and Materials Engineering
The effect of inorganic salts on adsorption of organics by fly ash, Pai-Yuan Horng, January 1987
Chemical and Materials Engineering
Reactions of atomic hydrogen with dichloromethane in a flow system, Shun-Hsien Huang, September 1987
Chemical and Materials Engineering
Time series analysis of respiration component in heart rate variability, Anuradha Ramaswamy Iyengar, May 1987
Electrical and Computer Engineering
Non-linear finite element of analysis of reinforced concrete members, Chellathurai Jeyamohan, May 1987
Civil and Environmental Engineering
An investigation of electrical and optical properties of sputtered amorphous silicon nitride and germanium thin films, Rajendra S. Khandelwal, May 1987
Electrical and Computer Engineering
A mathematical model of photopolymerization in a batch reactor, Jyh-Yao Li, May 1987
Chemical and Materials Engineering
Feasibility of using canine olfaction as a means of detecting hazardous substances, Stuart David Messur, May 1987
Civil and Environmental Engineering
Construction labor and productivity : productivity improvements, Stavros C. Nicolaou, May 1987
Civil and Environmental Engineering
Particle size distribution in isothermal batch emulsion polymerization, Bhavin R. Patel, May 1987
Chemical and Materials Engineering
Stress analysis of a stepped shaft with a keyway, Irfan Hussain Sabir, May 1987
Mechanical and Industrial Engineering
Process hazard review for drug development, Rudolph R. Schwarz, May 1987
Mechanical and Industrial Engineering
The kinetics and mechanism studies of cathodic electro-initiated crosslinking polymerization of unsaturated polyester prepolymer, Joseph Yuan-Ji Sheng, January 1987
Chemical and Materials Engineering
Indicators of microbial activity in biological treatment of hazardous wastes, Alexander McLean Sherrin, May 1987
Chemistry and Environmental Science
The sunlight effect on trace pollutants in wastewater, Alan R. Sheu, May 1987
Chemistry and Environmental Science
High temperature reactions of chloroform with methane, Thomas Siozopoulos, January 1987
Chemical and Materials Engineering
Reaction of hydrogen with methylene chloride and carbon tetrachloride at high temperature, Hun Tsao, September 1987
Chemical and Materials Engineering
Analysis of nitrated polycyclic hydrocarbons, PAH-quinones and related compounds in ambient air, Yalan Wang, May 1987
Civil and Environmental Engineering
Theses from 1986
Characterization of microorganisims after feeding with phenolic compounds : comparing a domestic sludge to an industrial sludge, Dianne Adamowitz, May 1986
Chemistry and Environmental Science
High temperature reactions of 1,2-dichloroethane with water vapor in a tubular reactor, Charles E. Anderson, December 1986
Civil and Environmental Engineering
Measurements of basic semiconductor properties, Abdolreza Ariantaj, May 1986
Electrical and Computer Engineering