In 1949, the Newark College of Engineering granted its first Master’s degrees, two each in Electrical Engineering and Mechanical Engineering. To date, NJIT has awarded more than 4,500 Master’s degrees. In addition to the theses from the more than 50 master’s programs, this collection includes theses for the professional degrees awarded prior to the establishment of the Graduate Division and theses for graduates with the designation Degree of Engineer. The library has accepted electronic submissions since 2010 and has been digitizing new theses and dissertations since 2000. We continue to digitize our catalog working backwards and by request.
The Robert W. Van Houten Library provides this service in an effort to make our graduates’ research more widely available.
Theses from 2024
The potential for automated insect classification using infrared remote sensing, Rachel Deahl, August 2024
Federated Department of Biological Sciences
Neural operator for accelerating coronal magnetic field computations in bifrost MHD model, Yutao Du, May 2024
Mechanical and Industrial Engineering
Comparison of methods for creating populations of models by solving stochastic inverse problems, Elizabeth Epstein, May 2024
Mathematical Sciences
Marking estimation in petri nets using dynamic mode decomposition, Aditya Kale, May 2024
Electrical and Computer Engineering
Effects of exoskeletal-assisted walking rehabilitation on gait of patients post stroke, Archisha Kanchan, May 2024
Biomedical Engineering
The next strike: Pioneering forward-thinking attack techniques with rowhammer in dram technologies, Nakul Kochar, May 2024
Electrical and Computer Engineering
Targeted drug delivery: investigating protein corona behavior, Atharva Markale, May 2024
Biomedical Engineering
Strawberry nectar preservation through innovative techniques and energy evaluation for high-pressure processing, Caterina Scaioli, May 2024
Mechanical and Industrial Engineering
Electrochemical nitrate reduction to ammonia on cu based nanoparticles using quantum mechanical simulations, Kathan Bhavin Shukla, May 2024
Chemical and Materials Engineering
Optimizing social determinant of health concept extraction, Niharika Singh, May 2024
Data Science
Methodology for developing biodegradable polymer blends and composites for agriculture, Fangzhong Xing, May 2024
Chemical and Materials Engineering
Theses from 2023
Investigating the rheological behavior of a simple yield stress fluid under shear flows, Francesco Accetta, August 2023
Mechanical and Industrial Engineering
A computational study of adsorptive desulfurization in metal organic frameworks, Kyle Concha, May 2023
Chemistry and Environmental Science
Assessing neurobehavioral deficits and neuroinflammation following rllb in a transgenic mouse model, Aakaash Gosain, December 2023
Biomedical Engineering
A survey on online matching and ad allocation, Ryan Lee, May 2023
Data Science
Bright light therapy and depression: assessing suitability using entrainment maps, Charles A. Mainwaring, May 2023
Mathematical Sciences
The role of trees in reducing the urban heat island effect on the New Jersey Institute of Technology campus, Newark, NJ, Dahlia Mansour, May 2023
Federated Department of Biological Sciences
The effects of blue light from digital displays on visual fatigue, Victor Taboadela, December 2023
Mechanical and Industrial Engineering
Gen-acceleration: Pioneering work for hardware accelerator generation using large language models, Durga Lakshmi Venkata Deepak Vungarala, December 2023
Electrical and Computer Engineering
The evaluation of carbon benefits produced by urban street trees, Hanyu Wang, May 2023
Federated Department of Biological Sciences
Characterization of low power HfO2 based switching devices for in-memory computing, Aseel Zeinati, May 2023
Electrical and Computer Engineering
Theses from 2022
Design and implementation of photovoltaic energy harvesting automaton, Iskandar Askarov, January 2022
Computer Science
Un-fair trojan: Targeted backdoor attacks against model fairness, Nicholas Furth, May 2022
Electrical and Computer Engineering
Quantitative dynamic cellular imaging based on 3d unwrapped optical coherence phase microscopy, ArunKumar Gunasekar, May 2022
Electrical and Computer Engineering
Assessing the health effects of climate change, social vulnerability, and environmental justice in Camden County, New Jersey, Daniil Ivanov, December 2022
Chemistry and Environmental Science
Student perception on acceptability and usefulness of sit-stand desks in college classrooms, Abiola Kuilan, December 2022
Mechanical and Industrial Engineering
A detailed parameter study into the dermal absorption of chemical warfare agents and the effects of pharmacokinetics, Koko Lear, May 2022
Chemical and Materials Engineering
The interconnection of the vestibular and oculomotor systems analyzed in healthy young adults by examining postural sway, Cassandra Martin, May 2022
Biomedical Engineering
Coupled oscillators: protein and acoustics, Angelique N. McFarlane, August 2022
Physics
Modeling of quad-station module cluster tools using petri nets, Aung Nay, December 2022
Electrical and Computer Engineering
Regulation of activity patterns in astyanax mexicanus cavefish, Udodirim Nwosu, May 2022
Federated Department of Biological Sciences
Back and shoulder exoskeletons for occupational use: a review, Erkan Ozan, August 2022
Mechanical and Industrial Engineering
Efficient and scalable triangle centrality algorithms in the arkouda framework, Joseph Thomas Patchett, August 2022
Computer Science
A neural analysis-synthesis approach to learning procedural audio models, Danzel Serrano, December 2022
Data Science
Theses from 2021
Real time analysis of eye movements using computer aided software, Farhan Ahmad, May 2021
Biomedical Engineering
Flexible microfluidic device with nonplanar interdigitated microelectrodes, Saud Alssaidy, December 2021
Chemical and Materials Engineering
Itraconazole nanocomposites prepared via rotary evaporator drying of nanomilled suspensions, Alexander Santos Coelho, December 2021
Chemical and Materials Engineering
Drug releasing hydrogels for opioid use disorder, Kaytlyn M. Crowe, August 2021
Biomedical Engineering
Assembly and detection of 3-D QR codes through additive manufacturing and terahertz imaging, Patrick Dunn, May 2021
Physics
RM-net: rasterizing Markov signals to images for deep learning, Kajal Gupta, May 2021
Computer Science
Stationary probability distributions of stochastic gradient descent and the success and failure of the diffusion approximation, William Joseph McCann, May 2021
Mathematical Sciences
Time series forecasting with applications to finance, Viswapriya Misra, May 2021
Computer Science
Finite element modeling of underwater acoustic environments and domain decomposition methods, General Ozochiawaeze, May 2021
Mathematical Sciences
iii-nitride ultraviolet light-emitting diodes: approaches for the enhanced efficiency, Moulik Patel, May 2021
Newark College of Engineering
The effects of design parameters on the neural recordings with micro-ECoG arrays, Manan Amish Sethia, May 2021
Biomedical Engineering
Short term temperature forecasting using LSTMS, and CNN, Darshan Shah, May 2021
Computer Science
Stock market prediction using investor sentiment, Sarvesh Shukla, May 2021
Computer Science
Land cover image segmentation based on individual class binary segmentation, Sathyanarayanan Somasunder, May 2021
Computer Science
The role of irak-1 transcripts in sepsis, Adithya Subramanian Sahasranamam, May 2021
Federated Department of Biological Sciences
Theses from 2020
Deep learning for quantitative motion tracking based on optical coherence tomography, Peter Abdelmalak, May 2020
Electrical and Computer Engineering
Privacy-preserving recommendation system using federated learning, Rahul Basu, May 2020
Computer Science
Cold storage work and cold protective gloves – a review, Daena Charles, December 2020
Mechanical and Industrial Engineering
An information theoretic approach to assess perceived audio quality using eeg with reduced number of electrodes, Sansit Das, May 2020
Electrical and Computer Engineering
Preparation and characterization of reactive composites combining boron with mixed oxides, Purvam Mehulkumar Gandhi, December 2020
Chemical and Materials Engineering
Recovery of valuable metals from spent lithium-ion batteries using organic acids: assessment of technoeconomic feasibility, Leqi Lin, May 2020
Civil and Environmental Engineering
Enhanced removal of perfluorooctanoic acid (PFOA) via microwave-fenton-reactive membrane filtration, Fangzhou Liu, May 2020
Civil and Environmental Engineering
Model-based deep siamese autoencoder for clustering single cell rna-seq data, Zixia Meng, May 2020
Computer Science
Incident duration time prediction using a supervised topic modeling method, Jihyun Park, December 2020
Civil and Environmental Engineering
Accelerating transitive closure of large-scale sparse graphs, Sanyamee Milindkumar Patel, December 2020
Computer Science
Treated HfO2 based rram devices with ru, tan, tin as top electrode for in-memory computing hardware, Yuvraj Dineshkumar Patel, December 2020
Electrical and Computer Engineering
Team formation using recommendation systems, Shreyas Patil, August 2020
Computer Science
Cycloidal-drive joint design for wearable exoskeletons, Abhi J. Rawal, December 2020
Mechanical and Industrial Engineering
A model for thermal diffusion and local tissue damage from the measurement of temperature in electrosurgical incision, Marek Vira, August 2020
Biomedical Engineering
Analysis of gameplay strategies in hearthstone: a data science approach, Connor W. Watson, May 2020
Computer Science
Human activity recognition using wearable sensors: a deep learning approach, Jialun Xue, December 2020
Electrical and Computer Engineering
Comparison of longitudinal changes in resting state functional magnetic resonance imaging between alzheimer’s and healthy controls, Berk Can Yilmaz, August 2020
Biomedical Engineering
Spectral 3d reconstruction based on macroscopic oct imaging, Xingyu Zhou, May 2020
Electrical and Computer Engineering
Theses from 2019
Experimentally linking head kinematics to brain deformation, Imouline Algharbi, January 2019
Biomedical Engineering
Predictive modeling of influenza in New England using a recurrent deep neural network, Alfred Amendolara, December 2019
Federated Department of Biological Sciences
Longitudinal investigation of disparity vergence in young adult convergence insufficiency patients, Patrick C. Crincoli, January 2019
Biomedical Engineering
Lithium as a possible therapeutic drug in posttraumatic brain injury, Tulika Das, December 2019
Biomedical Engineering
Effect of turbostratic orientations and confined fluid on mechanical strength of bi-layer graphene: a molecular dynamics study, Nil B. Dhankecha, January 2019
Mechanical and Industrial Engineering
Tomato puree convective heat transfer simulation using boussinesq approximation, Matteo Fabbri, May 2019
Mechanical and Industrial Engineering
A study of machine learning and deep learning models for solving medical imaging problems, Fadi G. Farhat, May 2019
Computer Science
Dental professionals occupational noise exposure and its auditory and non-auditory effects, Alexis Frees, December 2019
Mechanical and Industrial Engineering
Design and implementation of an automated oil distribution system for a homogenizer machine in gea mechanical equipment – niro soavi, Luca Gandolfi, May 2019
Mechanical and Industrial Engineering
Effect of 3d printed tablet shape on drug release profile, Christina Gedeon, December 2019
Chemical and Materials Engineering
Blind source separation using dictionary learning over time-varying channels, Anushreya Ghosh, May 2019
Electrical and Computer Engineering
Optical properties of polymers and their applications, Samiha Hossain, January 2019
Physics
Mechanics of binder-particle interactions in composite battery electrodes, Richard Johnson, May 2019
Mechanical and Industrial Engineering
A comparative study of russian trolls using several machine learning models on twitter data, Kannan Neten Dharan Kannan Neten Dharan, May 2019
Computer Science
Micro pipes – a portable integrated platform for electrochemical sensing using essence architecture, Hansin Kim, December 2019
Biomedical Engineering
Study and modelling of lithium ion cell with accurate soc measurement algorithm using Kalman filter for electric vehicles, Kasthuriramanan Mahendravadi Sivaguru, December 2019
Electrical and Computer Engineering
Magnetic field effects on lithium ion batteries, Kevin Mahon, December 2019
Electrical and Computer Engineering
Sedentariness, productivity, perception and long term health effects of sit-stand workstation at work: a literature review, Danielle Mengistab, May 2019
Mechanical and Industrial Engineering
Multiframe coded computation for distributed uplink channel decoding, Brinell F. Monteiro, May 2019
Electrical and Computer Engineering
Impact of stirrer speed and media type-loading on the breakage kinetics during wet stirred media milling of griseofulvin, Nathaniel Parker, December 2019
Chemical and Materials Engineering
Mechanical design automation: a case study on plastic extrusion die tooling, Allen Prasad Varghese, January 2019
Mechanical and Industrial Engineering
Vergence eye movement parameters for pre/post-obvat and sham therapy on binocularly normal controls, Joel V. Rajah, May 2019
Biomedical Engineering
Deep morphological neural networks, Yucong Shen, May 2019
Computer Science
The use of electrical resistance tomography to determine the minimum agitation speed for solids suspension in stirred tank reactors, Baran Teoman, May 2019
Chemical and Materials Engineering
An electrical matlab model of plasma electrolytic oxidation, Huize Xue, May 2019
Chemical and Materials Engineering
Glass transition temperature of particles for drug delivery, Yiqing Yang, May 2019
Chemical and Materials Engineering
Assignment of e-commerce orders to fulfillment warehouses, Ahmad Basem Zamka, January 2019
Mechanical and Industrial Engineering
Theses from 2018
Interactions between polymer nanoparticles and blood plasma applied to drug delivery systems, Mark Bannon, December 2018
Chemical and Materials Engineering
Improving methods to estimate time of death from body temperature, Carly Berdan, January 2018
Federated Department of Biological Sciences
Halal certification for an industrial machine intended to come in contact with food, Luca Caffarelli, May 2018
Mechanical and Industrial Engineering
Development of the commodity strategy: the case of sidel, Giuseppe Celiberti, May 2018
Mechanical and Industrial Engineering
Passive planar terahertz retroreflectors, Dhruvkumar Desai, January 2018
Physics
Family business: innovation and tradition in a global economy, Francesca Fornasari, May 2018
Mechanical and Industrial Engineering
Hypoxic and viral contributions to the etiopathogenesis of schizophrenia: a whole transcriptome analysis, Kathryn A. Gorski, May 2018
Computer Science
Sustaining dockless bike-sharing based on business principles, Neil Horowitz, August 2018
Civil and Environmental Engineering
Analysis of 3D printed NDFeB polymer bonded and organic based magnets, Chimaobi Ibeh, December 2018
Chemical and Materials Engineering
Intense ultrasonic waves in fluids: nonlinear behaviour, Jitendra Kewalramani, May 2018
Civil and Environmental Engineering
Mechanochemical nitration of aromatic compounds, Oleg Shlomo Lagoviyer, May 2018
Chemical and Materials Engineering
Knowledge management in new product development (NPD), Luca Maria Mancinelli, May 2018
Mechanical and Industrial Engineering
Head impacts in the A7FL, Stephen McGeever, May 2018
Biomedical Engineering
Icing thickness prediction model for overhead transmission lines, Yue Ming, December 2018
Electrical and Computer Engineering
PolyA DB3: a database cataloging polyadenation sites(pas) across different species and their conservation, Ram Mohan Nambiar, December 2018
Computer Science
Modelling of oxygen diffusion in cork, Swapnil Shivputra Rane, May 2018
Mechanical and Industrial Engineering
Detecting and characterizing self hiding behavior in android applications, Raina Samuel, May 2018
Computer Science
Changes in nadph oxidase (nox) protein isoforms and downstream reactions as function of time and overpressure in blast TBI, Smit Prakash Shah, January 2018
Biomedical Engineering
Start-up and open innovation, Gonxhe Tali, May 2018
Mechanical and Industrial Engineering
Amorphous metal oxide semiconductor thin film transistors for printed electronics, Mustafa Mohammad Yousef, December 2018
Electrical and Computer Engineering
Theses from 2017
Profiling the neurovascular cell interactions in alcohol exposure and HIV-1 infection, Agnieszka Agas, May 2017
Biomedical Engineering
Spatial and temporal deformation pattern of the brain from blunt trauma, Abdus Ali, August 2017
Biomedical Engineering
Computational and experimental determination of the mixing efficiency of a microfluidic serpentine micromixer, Siril Arockiam, December 2017
Chemical and Materials Engineering
Effects of 8 and 12 hour non-rotating shift schedules for security and protective services workers, Zuleyha Aydin, December 2017
Mechanical and Industrial Engineering
Formulation of uv curable resins utilized in vat photo polymerization for the additive manufacturing of gun propulsion charge in 3d printers, David T. Bird, December 2017
Physics
Carbon fiber electrodes for in vivo neural recording, Esma Cetinkaya, December 2017
Biomedical Engineering
High performance lattice boltzmann method yield-stress calculations based on intravital images of clot formation in live mice, Vishnu Deep Chandran, May 2017
Chemical and Materials Engineering
Experimental study of bubble rupture during shock-fluid interaction, Subhalakshmi Chandrasekaran, May 2017
Biomedical Engineering
Electrical properties of metal semiconductor contacts - metals on MoS2: a case study, Xiao Chang, December 2017
Physics
Multi-population-based differential evolution algorithm for optimization problems, Ishani Chatterjee, May 2017
Electrical and Computer Engineering
Denoising techniques reveal neural correlates of modulation masking release in auditory cortex, Sahil Chaubal, January 2017
Biomedical Engineering
III-nitride nanowire light-emitting diodes: design and characterization, Dipayan Datta Choudhary, May 2017
Electrical and Computer Engineering
Measurement of finger coordination during a motor learning task, Robert Ebel, May 2017
Biomedical Engineering
Using a bio-inspired model to understand the evolution of the remora adhesive disk, Kaelyn Mykel Gamel, May 2017
Federated Department of Biological Sciences
Electrical properties of metal/wse2structures, Zeel Rajiv Gandhi, December 2017
Physics
Interaction of voluntary activity and functional electrical stimulation in the upper extremity as a method for short-term alteration of corticospinal excitability and force control, Katherine Maia Gerton, August 2017
Biomedical Engineering
Preemptive efficient queueing for scheduling deadline-bound data center flows, VinayKrishna GopalaKrishna, May 2017
Electrical and Computer Engineering
Subject and group level changes and comparison in functional connectivity under low vs. high cognitively demanding naturalistic viewing conditions using fmri, Rakibul Hafiz, August 2017
Biomedical Engineering
Get a grip: Analysis of muscle activity and perceived comfort in using stylus grips, Evanda Vanease Henry, January 2017
Mechanical and Industrial Engineering
Undersampling GA-SVM for network intrusion detection, Zhenyu He, May 2017
Electrical and Computer Engineering
Heat transfer in silicon - experiments and simulation, Chihlin Huang, January 2017
Physics
Nanocomposite thermite powders with improved flowability prepared by mechanical milling, Ci Huang, May 2017
Chemical and Materials Engineering
Otolith morphologies in the genus sinocyclocheilus, Iqra Iqbal, January 2017
Federated Department of Biological Sciences
RCA: use and future possibilities, Bushra Marium Islam, May 2017
Civil and Environmental Engineering
Thermal swing membrane based method for CO2 capture from flue gas, Mukesh Kumar Kamad, May 2017
Chemical and Materials Engineering
Corrosion studies of stainless steel blades, Dhruv S. Kothari, May 2017
Physics
Decision tree rule-based feature selection for imbalanced data, Haoyue Liu, May 2017
Electrical and Computer Engineering
Eis analysis of shear enhanced microfluidic lab-on-a-chip device, Mehnaz Mursalat, January 2017
Chemical and Materials Engineering
Source-channel coding for coordination over a noisy two-node network, Sarah A. Obead, January 2017
Electrical and Computer Engineering
Memorizing chromic response to pressure, Maulik Kiritkumar Padh, May 2017
Physics
Characteristics of different deep neural networks and application of pre-trained model without transfer learning, Zhiqi Peng, December 2017
Computer Science
Changes in morphology during the development of the horn and hump of the Chinese cavefish sinocyclocheillus furcodorsalis, Michelle Pluviose, January 2017
Federated Department of Biological Sciences
Looping predictive method to improve accuracy of a machine learning model, Subramanyam Reddy Pogili, December 2017
Computer Science
Electrical, electronic and optical properties of MoSe2 and WSe2, Sushant Shashikant Rassay, January 2017
Physics
Investigation of NH3 and no adsorption over Cu/SAPO-34 and Cu/AlOo3 catalysts for NH3–SCR system, Basil Rawah, May 2017
Chemical and Materials Engineering
Novel experimental method for the determination of the minimum agitation speed for solids suspension in flat-bottomed stirred tank reactors, Shriarjun Shastry, January 2017
Chemical and Materials Engineering
Real time, integrated, paper based temperature sensor for lab on a chip device, Vignesh Shekhar, January 2017
Chemical and Materials Engineering
Field oriented control of permanent magnet synchronous motor with third-harmonic injection pulse width modulation to reduce quadrotors’ speed ripples, Yuxi Shi, May 2017
Electrical and Computer Engineering
Smart polymeric temperature sensors – for biological systems, Greenee Anilkumar Sinha, May 2017
Physics
Power dissipation and power correlations for a retreatblade impeller under different baffling conditions, Chadakarn Sirasitthichoke, May 2017
Chemical and Materials Engineering
Inkjet printing polymerized pcda as a means of serialization, Constantino Stavrou, January 2017
Physics
Iterative learning control for improved tracking of fluid percussion injury device, Steve Susanibar, August 2017
Electrical and Computer Engineering
Electrical, electronic and optical properties of MoS2 & WS2, Weitao Tang, January 2017
Physics
Numerical simulation for identification of insects using a cw lidar system, Christo Videlov, August 2017
Physics
Comparative analysis of the dissolution performance of aspirin tablets in the usp apparatus 2 and in a minivessel dissolution system, Annmarie C. Walker, December 2017
Chemical and Materials Engineering
Matrix completion algorithms with applications in biomedicine, e-commerce and social science, Yiran Wang, August 2017
Computer Science
A fuzzy logic-based text classification method for social media, Keyuan Wu, May 2017
Electrical and Computer Engineering
Theses from 2016
Semi supervised weighted maximum variance dimensionality reduction, Pranitha Surya Andalam, May 2016
Computer Science
An electromechanical system for characterization of piezoelectric materials, Ahmet Sait Asan, May 2016
Biomedical Engineering
Opto-mechanical design of synchrotron radiation-based far-infrared spectroscopic ellipsometer with strong magnetic-field, Ahmad Abbas Chaudhry, January 2016
Physics
A computational model for transdermal diffusion of lidocaine and tetracaine topical patches, Qian Dong, May 2016
Physics
Infrared imaging - case studies and applications, Shuang Du, May 2016
Physics
Data analytics with mapreduce in apache spark and hadoop systems, Zongxuan Du, May 2016
Computer Science
Optimum distance between ground base stations for high-speed train communications using free-space optical laser links, Sina Fathi Kazerooni, May 2016
Electrical and Computer Engineering
Diffusivity of drug actives in transdermal drug delivery (TDD), Natali R. Gendelberg, May 2016
Physics
Synthesis of a renewable sourced thermotropic polyester with 2,5-furandicarboxylic acid, Alicia Marie Marguerite Hurst, January 2016
Chemical and Materials Engineering
Antibacterial efficacy of nanometals in conjunction with electrical stimulus, Syed A. Hussain, May 2016
Biomedical Engineering
Response of stretch-injured schwann cells, Stephanie Iring, May 2016
Biomedical Engineering
Dissolution kinetics of model api in molten polymer excipients during batch processing, Shen Ji, May 2016
Chemical and Materials Engineering
Effects of human development on aeolian sediment transport rates within an adjacent undeveloped backshore enclave, Kayla L. Kaplan, January 2016
Chemistry and Environmental Science
Magnetic augmented rotation system (MARS ) - properties and performance, Ruolei Liu, May 2016
Physics
An FPGA implementation of a sleep enabled PON system, Zheyu Liu, January 2016
Electrical and Computer Engineering
Computational and experimental determination of the hydrodynamics in a stirred unbaffled vessel provided with angle-mounted axial impellers, Ji Ma, January 2016
Chemical and Materials Engineering
Simulation of a low voltage customer microgrid using petri nets, Joshua Mark, May 2016
Electrical and Computer Engineering
Thermoelectric properties of silicon-germanium alloys, Aniket Annasaheb Maske, January 2016
Physics
Continuum mechanical analysis of space and time dependent deformation pattern of brain with blunt injury, Chen Miao, May 2016
Biomedical Engineering
Rodent testing device surrogate for shockwave blast testing, Anthony C. Misistia, January 2016
Biomedical Engineering
Investigating neural mechanisms of hand movements in virtual reality, Chuang Mu, January 2016
Biomedical Engineering
A preliminary investigation of the sterile-filterability of BCS class II drug nanosuspensions prepared via wet stirred media milling, Parul Ohri, January 2016
Chemical and Materials Engineering
A study of kinematics and kinetics in time-constrained arm movements, Oyindamola Owoeye, January 2016
Biomedical Engineering
Realization of dynamixel servo plant parameters to improve admittance control for a compliant human-robot interaction, Ahmad Zahid Rao, January 2016
Biomedical Engineering
Moths fight back: arms race in the cloud forest, Diana Pamela Rivera, January 2016
Federated Department of Biological Sciences
Effectiveness of water quality benefits provided by stormwater management facilities/infiltration basin, Vinicius Rodrigues de Mattos Barreto, May 2016
Civil and Environmental Engineering
Multisensory integration in weakly electric fish, Andrea Roeser, May 2016
Federated Department of Biological Sciences
Effect of melt method on thoracolumbar connective tissue, Faria Sanjana, May 2016
Biomedical Engineering
Radiative properties of silicon related materials, Scott Sanowitz, May 2016
Physics
Shock wave interaction with a fluid filled cylinder experimental methods, Praveen Kumar Baba Siddabattuni, January 2016
Mechanical and Industrial Engineering
Gene network understanding and analysis, Maria E. Somoza, May 2016
Computer Science
Effect of temperature on the fracture behavior of lead-free solder joints, Patrick Thompson, May 2016
Mechanical and Industrial Engineering
Development and analysis of aluminum-PTFE reactive composite material, Siva Kumar Valluri, May 2016
Chemical and Materials Engineering
Koh etching of silicon, Ying Wang, May 2016
Physics
Comparison of muscle synergies elicited from transcranial meganetic stimulation (tms) and voluntary movements, Yifei Wei, January 2016
Biomedical Engineering
Triplex dna receptor-gold nanoparticle conjugates for detection of oxidized dna base, Qingyu Xing, January 2016
Chemistry and Environmental Science
Uusing the KDJ as a trading strategy on biotech companies, Shijie Zha, May 2016
Computer Science
Preparation, ignition and combustion of reactive metal-sulfur nanocomposites, Ziyue Zhong, May 2016
Chemical and Materials Engineering
Theses from 2015
Rice and mouse quantitative phenotype prediction in genome-wide association studies with support vector regression, Abdulrhman Fahad M. Aljouie, January 2015
Computer Science
Principles and applications of mechanical dry coating - review and state-of-the-art, Sayani Bhaumik, May 2015
Chemical and Materials Engineering
Effects of onsite stretching exercise on employee musculoskeletal discomfort and wellbeing, Kellie L. Caldwell, May 2015
Mechanical and Industrial Engineering
Characterizing alma for solar observation, Yi Chai, May 2015
Physics
Fates of spilt oil and factors affecting the bio-degradation of oil: a review, Amogh-Ranganath Chakravarthy, January 2015
Civil and Environmental Engineering
Computational studies of electronic structure of doped graphene, Yan Chu, May 2015
Physics
Combustion dynamics of metal powders in mixed gas flows, Amy Lee Corcoran, January 2015
Chemical and Materials Engineering
Assessment of flood protection strategies for combined critical infrastructure failure and hurricane/storm surge events in the Meadowlands area, Nisharg Dipakkumar Dalwadi, January 2015
Civil and Environmental Engineering
Modeling of electrical behavior of graphene-based ultracapacitors, Patrick Dzisah, May 2015
Physics
Hollow cathode sputtering system - installation, operation and theoretical background, Sebastian Falk, May 2015
Electrical and Computer Engineering
The kinetics of drug dissolution in polymers during hot-melt extrusion, Huayang Fang, May 2015
Chemical and Materials Engineering
Design, construction and characterization of a wind tunnel, Chang Ge, May 2015
Physics
Fem of electrospinning compared to inkjet printing model, Maikel Ghaly, January 2015
Biomedical Engineering
Structural health monitoring of bridges using wireless sensor networks, Seyed Behrad Ghazi Sharyatpanahi, May 2015
Civil and Environmental Engineering
Exact genome alignment, Nandini Ghosh, May 2015
Computer Science
The role of electronsensory signals on the locomotor performance of the weakly electric fish apteronotus albifrons, Oswaldo Gil-Guevara, August 2015
College of Science and Liberal Arts
Development of a finite element method for light activated polymers, Craig Hamel, May 2015
Mechanical and Industrial Engineering
An electrospinning apparatus for the production of heterogeneous scaffolds and their application in cartilage regeneration, Andrew Ryan Hollingsworth, January 2015
Biomedical Engineering
An extended duration operation for solid hollow fiber cooling crystallization method, Chi Jin, May 2015
Physics
Effect of endplate on the blast wave profile in a compressed gas shock tube, Sudeepto Kahali, August 2015
Mechanical and Industrial Engineering
Simulation of electronic and optical properties of graphene, Biao Leng, May 2015
Physics
Visualeyes 2020: a software suite to integrate instrumentation to study the near triad of vergence, Stephen J. Lestrange, January 2015
Biomedical Engineering
Design, construction and characterization OFA magnetic augmented rotation system (MARS) based wind turbine, Da Li, May 2015
Physics
Petri net models of microgrids with distributed generators, Xiaoyu Lu, January 2015
Electrical and Computer Engineering
Differentiation of mouse embryonic stem cells into insulin-producing cells: optimization to enhance the overall differentiation efficiency, Xiaotang Ma, May 2015
Biomedical Engineering
Communication risk and strategy in temporary organizations, Shelley R. McIvor, May 2015
Humanities
Thermal properties of graphene, Vishal Vijay Nakhate, May 2015
Physics
Tendon reflex protocol for exploring the mechanisms associated with whole body vibration, Ikechukwu Okeke, May 2015
Biomedical Engineering
Behavior of deformed dermal fibroblasts seeded on a silicon membrane under high levels of strain, Laura Osorno, May 2015
Biomedical Engineering
Computer aided analysis of skin lesions, Sukanya Panja, January 2015
Electrical and Computer Engineering
Review of steganalysis of digital images, Xinlei Pan, May 2015
Electrical and Computer Engineering
Cancer risk prediction with next generation sequencing data using machine learning, Nihir Patel, January 2015
Computer Science
Processing and characterization of graphene and graphene on silicon, Cheng Peng, May 2015
Physics
Unsupervised gene regulatory network inference on microarray data, Nidhi Radia, May 2015
Computer Science
Modeling the controlled delivery power grid, Vinit Madhukar Sahasrabudhe, August 2015
Electrical and Computer Engineering
An embedded system supporting dynamic partial reconfiguration of hardware resources for morphological image processing, Gyana Ranjan Sahu, January 2015
Electrical and Computer Engineering
Optical properties of black silicon - an analysis, Suramya Sekhri, May 2015
Physics
Experimental determination of the agitation requirements for solids suspension in dissolution systems using a mini paddle apparatus, Yang Song, May 2015
Chemical and Materials Engineering
Effect of impeller submergence on power dissipation and solids suspension in mixing systems equipped with pitch-blade turbines, Yufeng Song, May 2015
Chemical and Materials Engineering
Experimental determination of solids suspension with angled impeller in a pharmaceutical mixing vessel, Yingxi Tang, May 2015
Chemical and Materials Engineering
Ultracapacitors for off grid wind power systems, Hans Tanis, May 2015
Physics
Identifying modifier genes in SMA model mice, Weiting Xu, May 2015
Computer Science
Bio-medicinal application for plasma electrolytic oxidation of metals, Zunjian Yang, May 2015
Physics
Theses from 2014
Using latent semantic analysis to detect non-cognitive variables of academic performance, Daniel Richard Aalderks, January 2014
Humanities
Using the piezoelectric backscatter signal for remote sensing of neural signals, Eren Alay, January 2014
Biomedical Engineering
Optimizing alginate-chitosan microcapsules using co-axial air flow method as 3d stem cell microenvironment, Noel Alfonso, May 2014
Biomedical Engineering
Influence of lateral boundaries in tapped densification of granular materials, Nathaniel Ching, January 2014
Mechanical and Industrial Engineering
The winds of change: the political ecology of renewable energy transition in Vermont, Jill McNulty Clegg, January 2014
Civil and Environmental Engineering
Public private partnership in transit projects, Rashmita DasChaudhuri, January 2014
Civil and Environmental Engineering
Approach to flood mitigation - a post sandy study in New Jersey Meadowlands area, Banshari Datta, May 2014
Civil and Environmental Engineering
Differentiating schizophrenic patients from healthy control; application of machine learning to resting state fmri, Hossein Ebrahimi Nezhad, January 2014
Biomedical Engineering
Translation and transcription are required for endogenous bursting after long term removal of neuromodulators, Stefanie Eisenbach, August 2014
Federated Department of Biological Sciences
Hydrodynamic CFD modeling of a pharmaceutical reactor vessel provided with a retreat-blade impeller under different baffling conditions, Christopher G. Foehner, May 2014
Chemical and Materials Engineering
Innovations in state-level solar energy policy : motivating community investment in resiliency, Sarah Katheryn Gentile, January 2014
Chemistry and Environmental Science
Risk prediction with genomic data, Bharati Jadhav, May 2014
Computer Science
Thermochemical properties of c3 to c5 unsaturated carbonyl alkenes: enthalpies of formation, entropy, heat capacity, bond enthalpy, Ruiqi Jian, January 2014
Chemistry and Environmental Science
The photophysics properties of lanthanide luminescent probes, Ke Li, August 2014
Chemical and Materials Engineering
Effect of temperature on tunneling and quantum efficiency in cigs solar cells, Sizhan Liu, January 2014
Physics
Preparation and characterization of fast dissolving pullulan films containing griseofulvin nanoparticles for bioavailability enhancement, Zhelun Ma, August 2014
Chemical and Materials Engineering
Evaluation of methods to account for release from nanofiber scaffolds, Jennifer Moy, May 2014
Biomedical Engineering
Mapping ms-ptc programmatic core competencies to emerging professionalization standards: are our students fully prepared?, Faye Newsham, January 2014
Humanities
Mems approaches in infrared imaging, George Papavieros, January 2014
Physics
Analysis of transport properties in a zaz graphene nanoribbon junction using various dopants, Natasha Parikh, January 2014
Physics
Mathematically modeling the mechanical constants of thoracolumbar fascia under compression, in vivo, Vrajeshri Patel, January 2014
Biomedical Engineering
Formation of branching angles at bifurcations of ant trail networks, Subash Kusum Ray, August 2014
Federated Department of Biological Sciences
The effect of vergence vision training on binocularly normal subjects, Henry Talasan, May 2014
Biomedical Engineering
Developing a labview based thermally stimulated current (tsc) controller to measure residual charge in electrospinning, Jai Abhishekh Veezhinathan, January 2014
Biomedical Engineering
Gaussian beam scattering from a deterministic rough metal surface, Qi Wang, August 2014
Electrical and Computer Engineering
Combustion of fine magnesium particles, Song Wang, May 2014
Chemical and Materials Engineering
Short term modification of vergence ramp eye movements in the convergent direction, Chang Yaramothu, May 2014
Biomedical Engineering
Assessment of a marine polysaccharide for use as excipient in pharmaceutical hot-melt extrusion, Qing Ye, May 2014
Chemical and Materials Engineering
Model predictive control of timed continuous petri nets, Huaiyu Zhan, January 2014
Electrical and Computer Engineering
Dispersion and dissolution kinetics of API particles in pharmaceutical hot melt extrusion, Wang Zhan, May 2014
Chemical and Materials Engineering
Experimental determination of the mixing requirements for solid suspension in pharmaceutical stirred tank reactors, Anqi Zhou, May 2014
Chemical and Materials Engineering
Comparison of different differential expression analysis tools for rna-seq data, Junfei Zhu, January 2014
Computer Science
Theses from 2013
Power dissipation and mixing time in a partially filled pharmaceutical reactor equipped with a retreat-blade impeller at different fill ratios, Aniruddha Banerjee, May 2013
Chemical and Materials Engineering
Role of materials & design on performance of baseball bats, Kim Benson-Worth, May 2013
Physics
Quantification of human motion on roller coaster rides, Chirag Burman, January 2013
Biomedical Engineering
Admittance control of the intelligent assist robot manipulator for people with duchenne muscular dystrophy, Madeline Corrigan, May 2013
Biomedical Engineering
Model predictive control for building temperature regulation, Weiqiang Dong, May 2013
Electrical and Computer Engineering
Deer impact and plant resistance traits, Xueyang Fan, May 2013
Federated Department of Biological Sciences
Online resources for technical communication in writing across the curriculum at technological universities - a case study, Deborah A. Hulse-Miksiewicz, May 2013
Humanities
Safety performance comparison between light rail transit and subway, Nehemie Jasmin, January 2013
Civil and Environmental Engineering
Research on MPPT methods for photovoltaic system based on microgrid, Jingchu Ji, May 2013
Electrical and Computer Engineering
Engineering spores to display g protein-coupled receptors for directed evolution, Alyssa Misoo Kim, May 2013
Chemical and Materials Engineering
Study of poly (l-lactic acid)/poly (d-lactic acid) stereocomplex as nucleating agent for poly (l- lactic acid) crystallization, Yuan Lao, May 2013
Physics
Current measurements in electrospinning, Clinton K. Lien, May 2013
Physics
Effects of API particle size on the dissolution rate in molten polymer excipient matrices during hot melt extrusion, conducted in a co-rotating twin-screw extruder, Meng Li, May 2013
Chemical and Materials Engineering
Polyaseeker: a computational framework for identifying polyadenylation cleavage site from RNA-seq, Xiao Ling, May 2013
Computer Science
Validation of solar flare forecasting & evolution of magnetic helicity of two active regions, Qin Li, May 2013
Physics
Hydrodynamic effects of a cannula in a USP dissolution testing apparatus 2, Qianqian Liu, May 2013
Chemical and Materials Engineering
Performance comparison of five RNA-seq alignment tools, Yuanpeng Lu, May 2013
Computer Science
Brain computer interface based neurorehabilitation technique using a commercially available EEG headset, Abhineet Mishra, May 2013
Biomedical Engineering
RNA-sequence analysis of human melanoma cells, Jharna Miya, May 2013
Computer Science
NIR light transmission through skin and muscle, Deniz Ozgulbas, May 2013
Biomedical Engineering
Effect of scan time on resting state parameters, Dhruti Patel, May 2013
Biomedical Engineering
QSAR modeling of chemical penetration enhancers using novel replacement algorithms, Hui Qiu, May 2013
Chemical and Materials Engineering
Dissolution of different commercial aspirin tablets using a novel off-center paddle impeller (OPI) dissolution testing system, Yang Qu, May 2013
Chemical and Materials Engineering
A GPU program to compute SNP-SNP interactions in genome-wide association studies, Srividya Ramakrishnan, May 2013
Computer Science
New economy : assessment of the institutionalization of an emerging paradigm and academic field through inquiry into prominent boundary organizations, Jeanine Cava Rodgers, January 2013
Chemistry and Environmental Science
Solar eclipse observation on may 21, 2012 from JVLA, Shaheda Begum Shaik, August 2013
Physics
Fuzzy logic for task space telemanipulation of a five fingered robotic hand, Raaghavann Srinivasan, January 2013
Biomedical Engineering
Effect of tablet compression on the dissolution of aspirin tablets using a novel off-center paddle impeller (opi) dissolution testing system, Chuan Sun, May 2013
Chemical and Materials Engineering
Genome wide search for pseudo knotted non-coding RNAs, Meghana S. Vasavada, May 2013
Computer Science
Production of stable bcs class ii drug suspensions by melt emulsification and subsequent incorporation into polymer strip films, Emanuel Joseph Vizzotti, May 2013
Chemical and Materials Engineering
Hollow fiber membrane-based air gap membrane distillation, Xuan Wang, May 2013
Chemical and Materials Engineering
Measurement of gas flow through porous structures using thz spectroscopy, Yihui Wang, May 2013
Physics
Chemical and Materials Engineering
Heterogeneous combustion of condensed particles in transition regime, Deniz Yildiz, May 2013
Chemical and Materials Engineering
Finite element modeling of temperature elevation due to NIR exposure in neural tissue, Atabek Can Yucel, May 2013
Biomedical Engineering
Diffuse axonal injury effect on myelinating cells and axons, Jennifer Alison Zalk, January 2013
Biomedical Engineering
Detection of video frame insertion based on constraint of human visual perception, Lu Zheng, May 2013
Electrical and Computer Engineering
Methane partial oxidation over phthalocyanine catalyst, Yuan Zhu, May 2013
Chemical and Materials Engineering
Theses from 2012
Ergonomic evaluation of shoulder muscle activation during light weight hand tool exertion task, Gul Ahmed, August 2012
Mechanical and Industrial Engineering
Combustion dynamics of individual reactive material particles, Carlo Francisco Badiola, January 2012
Chemical and Materials Engineering
Analysis of tissue engineering strategies for bone-related applications, Timothy Buirkle, May 2012
Biomedical Engineering
The mechanical testing of single nanofiber, Pratik Manohar Dahule, January 2012
Mechanical and Industrial Engineering
Temperature elevations due to NIR exposure in the brain tissue, Ali Ersen, January 2012
Biomedical Engineering
Magnetic iron oxide nanoparticles: synthesis, characteristics, magnetic behavior, and biomedical applications, Chengyin Fu, May 2012
Physics
Alendronate treatment elicits a reduction in fatigue-life of canine cortical bone, Joseph Ryan Geissler, January 2012
Biomedical Engineering
The effects of theophylline on the in vitro respiratory response to hypoxia, Ke Geng, May 2012
Federated Department of Biological Sciences
Neural differentiation of pluripotent stem cells and applications to micropatterned agarose hydrogel for nerve guidance, Jamila S. Gittens, January 2012
Biomedical Engineering
Theoretical prediction of joint reaction force in a dynamic general 3-d pendulum tree model for human or animal motion, Sucheta Goyal, January 2012
Biomedical Engineering
Dynamic friction: measurement and results, Yanal Jij, January 2012
Electrical and Computer Engineering
High-performance matrix multiplication on Intel and FGPA platforms, Gang Li, May 2012
Electrical and Computer Engineering
Moxon based RFID tag reader and GPS antenna, Haojiong Liu, May 2012
Electrical and Computer Engineering
Magnetic targeted drug delivery system in gene therapy, Weilong Lu, May 2012
Physics
Hydrogen storage in pt/carbon nanotube sheets, An-Yu Ma, January 2012
Physics
Development of gis database for hayward fault, Olugbope Maku, January 2012
Civil and Environmental Engineering
Single-carrier frequency domain equalization using subband decomposition for optical wireless communications, Di Mu, January 2012
Electrical and Computer Engineering
Alterations in brain connectivity after spinal cord injury using functional MRI, Yamin Ahmed Noor, May 2012
Biomedical Engineering
Analysis and mitigation of carrier frequency offset for uplink of OFDMA, Abhishek R. Panchal, January 2012
Electrical and Computer Engineering
Experimental evaluation of near infrared light penetration into neural tissue, Ujwal Anil Parikh, May 2012
Biomedical Engineering
Quantifying prehension in persons with stroke post rehabilitation, Saumya Sara Puthenveettil, May 2012
Biomedical Engineering
Preparation of different polyamide nanofiltration membranes by interfacial polymerization and the effect of post-polymerization treatment on separation performance, Yu Qin, January 2012
Chemical and Materials Engineering
Development of 3-d liver model for drug screening applications, Divya Rajendran, January 2012
Biomedical Engineering
Data mining of tetraloop-tetraloop receptors in RNA XML files, Sinan Ramazanoglu, May 2012
Computer Science
Phenotype prediction and feature selection in genome-wide association studies, Andrew Roberts, May 2012
Computer Science
Challenges of permitting ballast water discharges from commercial vessels in U.S. waters, Paul Rodriguez, August 2012
Civil and Environmental Engineering
NeuralSTA: a software tool for neural stimulation and recording applications with a laser control, Rimi Sahu, January 2012
Biomedical Engineering
A comparative analysis of machine learning algorithms for genome wide association studies, Neha Singh, May 2012
Computer Science
Utilization of a tropospheric-stratospheric lidar system to study mountain induced gravity waves over jenny jump state forest, Anthony Teti, August 2012
Physics
Soy protein-poly (l-lactic acid) blend nanofibers for drug delivery of nardostachys jatamansi, Swetha Tiwari, January 2012
Biomedical Engineering
Heterogeneity-aware and energy-aware scheduling and routing in wireless sensor networks, Mahesh Kumar Vasanthu Somashekar, May 2012
Computer Science
An examination of coordination among friends and strangers from a coordination theory perspective, Christopher D. Wamble, January 2012
Informatics
Three-dimensional magnetic field sensor in IBM 0.18μm CMOS technology, Gang Wang, May 2012
Electrical and Computer Engineering
Design and synthesis studies of new s-adenosyl-l-methionine analogues, Shanshan Wu, May 2012
Chemistry and Environmental Science
The functional effects of barium and hypoxia on the in vitro respiratory activity, Gaofeng Xu, May 2012
Federated Department of Biological Sciences
Reducing the risk of software cost estimation, Shixian Yang, May 2012
Computer Science
fMRI assessment of ischemic stroke in humans, Rui Yuan, May 2012
Electrical and Computer Engineering
GPU implementation of block transforms, Boyan Zhang, August 2012
Electrical and Computer Engineering
Non-destructive evaluation of agglomerated cork products using THz spectroscopy and imaging, Han Zhang, January 2012
Physics
Simulation of polymer solar cell characteristics by amps-1d, Lu Zhang, May 2012
Physics
Hydrodynamic effects of an arch-shaped fiber optic probe in a dissolution testing apparatus 2, Yiran Zhang, May 2012
Chemical and Materials Engineering
Theses from 2011
Dissolution testing of prednisone and salicylic acid calibrator tablets at different tablet locations, Anandhavalavan Arulmozhi, May 2011
Chemical and Materials Engineering
Non-invasive interventions top reduce low back dysfunction, Nadi Atalla, January 2011
Biomedical Engineering
Development of a centrifugal microfluidic device for separation and sorting in biological fluids, Gaurav Sunil Bagwe, January 2011
Biomedical Engineering
Neurorehabilitation of the hand using the cybergrasp[TM] and mirror image, Amy Frances Boos, January 2011
Biomedical Engineering
Thermochemistry and bond energies of acetohydrazide, amides and cyclic alkyl ethers, Sumit Charaya, May 2011
Chemistry and Environmental Science
Development of a vibration-powered impact recorder, William Contreras, August 2011
Electrical and Computer Engineering
Energy scavenging system for indoor wireless sensor network, David Andrew Crea, January 2011
Electrical and Computer Engineering
The effect of dynamic standing on the bone mineral density of non-ambulatory children: a pilot study, Megan Diane Damcott, May 2011
Biomedical Engineering
Tilt simulation : virtual reality based upper extremity stroke rehabilitation, Harish Damodaran, January 2011
Biomedical Engineering
Design and fabrication of a tapped densification apparatus for bulk solids, Joshua H. De Jong, January 2011
Mechanical and Industrial Engineering
Study of controlled release of dapsone from modified montmorillonite and polymer matrices, Jia Fan, January 2011
Chemical and Materials Engineering
Synthesis towards synthetic adenosine receptor, Rajni Gupta, May 2011
Chemistry and Environmental Science
Biomechanical analysis of asymmetric and dynamic lifting task, Xiaopeng Jiang, May 2011
Mechanical and Industrial Engineering
EMG-based determination of upper extremity virtual trajectory, Akshata Anand Korgaonkar, January 2011
Biomedical Engineering
Digital image forensics, Fei Long, May 2011
Electrical and Computer Engineering
Aminormotiffinder - a graph grammar based tool to effectively search a minor motifs in 3D RNA molecules, Ankur Malhotra, January 2011
Computer Science
g-factors for ternary crystals of groups iii and v, Liviu Mateescu, May 2011
Physics
Dynamic-parinet (D-parinet) : indexing present and future trajectories in networks, Mou Nandi, May 2011
Computer Science
Motor planning for reach memorization task in 3D space, Atul Narkhede, January 2011
Biomedical Engineering
Dissolution of disintegrating solid dosage forms in a modified dissolution testing apparatus 2, Shrutiben Rameshbhai Parekh, May 2011
Chemical and Materials Engineering
Fast program for sequence alignment using partition function posterior probabilities, Meera Prasad, May 2011
Computer Science
Effects of hypertension and aging on vascular smooth muscle cell contribution to reconstituted aortic tissue stiffness, Nancy Lisa Sehgel, January 2011
Biomedical Engineering
Ranking single nucleotide polymorphisms with support vector regression in continuous phenotypes, Seif Shahidain, May 2011
Mathematical Sciences
Use of fluorescent micropsheres to measure coronary flow reserve in rat animal model, Riddhi Harsh Shah, August 2011
Biomedical Engineering
A microfluidic culture for two populations of dorsal root ganglia for differential staining, Ishnoor Sidhu, May 2011
Biomedical Engineering
Thermochemical properties, bond energies and internal rotor potentials in methyl ethyl sulfide and oxygenated sulfur hydrocarbons intermediates for modeling its combustion and atmospheric chemistry, Guanghui Song, May 2011
Chemical and Materials Engineering
Design and evaluation of an adaptable vector coprocessor for multicores, Timothy William Steele, May 2011
Electrical and Computer Engineering
Transdermal and transbuccal delivery of lidocaine and nicotine : combined effects of iontophoresis and chemical enhancers, Ran Wei, May 2011
Chemical and Materials Engineering
Modeling next generation air traffic control system with petri net, Hang Wu, January 2011
Electrical and Computer Engineering
Orthogonal space time coding for IM/DD optical wireless communication with single carrier frequency domain equalization, Nan Wu, August 2011
Electrical and Computer Engineering
Influence of rear wheel tire type on wheelchair propulsion biomechanics, Mathew Yarossi, August 2011
Biomedical Engineering
Investigation of the potential catalytic activities of several metal organic framework (MOF) materials, Guangyu Zhang, May 2011
Chemical and Materials Engineering
Theses from 2010
Web-based portfolio assessment : An open source solution for platform design, Regina Collins, May 2010
Humanities
Type-1 diabetes risk prediction using multiple kernel learning, Paras Garg, May 2010
Computer Science
Comparison between different techniques of preprocessing for resting state fMRI analysis, Megha Girdhar, May 2010
Biomedical Engineering
In silico prediction of non-coding RNAs using supervised learning and feature ranking methods, Stephen J. Griesmer, January 2010
Computer Science
Axon guided axon growth in DRG neurons from the spinal cord of rat embryos, Neha Jain, May 2010
Biomedical Engineering
Effectiveness of safety training, Mayeanna Kamara, May 2010
Mechanical and Industrial Engineering
Motor data scaling by respiration frequencies in rest, Amit Madhukar Kamble, August 2010
Biomedical Engineering
Design of drug delivery strategies based on well-stirred experiments, Kumud Kanneganti, May 2010
Chemical and Materials Engineering
The effect of handle characteristics of a hammer stapler on biomechanical and physiological response, Wayne Latta, May 2010
Mechanical and Industrial Engineering
Interfacially polymerized thin film composite membranes on microporous polypropylene supports for reverse osmosis desalination, Chao Li, May 2010
Physics
Power flow in railway electrification power system, Sisi Li, May 2010
Electrical and Computer Engineering
Social group discovery using using co-location traces, Steve Mardenfeld, January 2010
Computer Science
A FPGA/DSP design for real-time fracture detection using low transient pulse, Akash Mathur, January 2010
Electrical and Computer Engineering
Sparse representation for audio noise removal using zero-zone quantizers, Neha Mittal, January 2010
Electrical and Computer Engineering
Stiffness of vascular smooth muscle cells from aged primates measured using reconstituted tissue model, Shilpa Nagendra, January 2010
Biomedical Engineering
A study of probability distributions of DCT coefficients in JPEG compression, Gopal Thirumalai Narayanan, May 2010
Electrical and Computer Engineering
A comparison of software engines for simulation of closed-loop control systems, Sanket D. Nikam, May 2010
Electrical and Computer Engineering
Development of pharmacophore and comfa study of rigid and flexible sigma 2 receptor ligands, Hemantbhai Patel, January 2010
Chemistry and Environmental Science
Study of methods to predict voltage collapse, Niki Patel, May 2010
Electrical and Computer Engineering
Exploiting the concept of hysteresis in ankle dysfunction and ankle strengthening, Akshay Narendra Pujara, May 2010
Biomedical Engineering
Air piston approach to wave power generation, Arun Ramadass, May 2010
Electrical and Computer Engineering
A comparative analysis of haptic and EEG devices for evaluation and training of post-stroke patients within a virtual environment, Gregory Nicholas Ranky, January 2010
Biomedical Engineering
A FPGA/DSP based ultrasound system for tumor detection, Ashish Ravindra Ratnakar, May 2010
Electrical and Computer Engineering
Stochastic and deterministic dynamics investigation of the microstructure of granular materials, Vishagan Ratnaswamy, May 2010
Mechanical and Industrial Engineering
PAPR reduction in OFDM communications with generalized discrete Fourier transform, Sertac Sayin, May 2010
Electrical and Computer Engineering
A haptic control system for functional electrical stimulation of paraplegic legs, Mark R. Shaker, August 2010
Biomedical Engineering
Automation of anatomic torsion monitor for evaluation and improvement of low back dysfunction, Vishal Kumar Singh, May 2010
Biomedical Engineering
Synoptic variability of a CIR-driven open-closed boundary during solar minimum, Kevin Urban, August 2010
Physics
Development of a device for whole body stimulation of the otoliths, Jon Edward Weimer, January 2010
Biomedical Engineering
Minimum agitation speed for solid suspension and mixing time in a torispherical -bottomed pharmaceutical stirred tank under different baffling conditions, Dilanji Bhagya Wijayasekara, May 2010
Chemical and Materials Engineering
Theses from 2009
Preparation of nanovehicles for targeted drug delivery, Anagha Avinash Bhakay, January 2009
Chemical and Materials Engineering
In vitro comparison of a new stand-alone anterior lumbar interbody cage device with established fixation techniques, Nitin Chawla, May 2009
Biomedical Engineering
Experimental investigation of mixing time in a stirred, torispherical-bottomed tank equipped with a retreat-blade impeller, Nonjaros Chomcharn, May 2009
Chemical and Materials Engineering
Sustainable site remediation : a life cycle assessment approach, Harnoor Dhaliwal, January 2009
Chemistry and Environmental Science
Reliability of resting brain networks using FMRI, Suril Rajeshkumar Gohel, May 2009
Biomedical Engineering
An in vitro study to characterize a new automated high throughput neuronal stretch injury system, Nicolae Valerian Hususan, May 2009
Biomedical Engineering
Aptamer-based nano-scale dielectric sensor for protein detection, Teena James, January 2009
Biomedical Engineering
Game engine architecture : A comprehensive view, Donald Kehoe, August 2009
Computer Science
Nano-structured platforms as a spectroscopic tool, Ruiqiong Li, January 2009
Electrical and Computer Engineering
Deciphering the biology of axon stretch-growth, Joseph R. Loverde, January 2009
Biomedical Engineering
Development of a toolbox for the kinematic evaluation of hands-up video games, Brooke Marie Odle, August 2009
Biomedical Engineering
Study and development of ultrasound monitoring of skeletal defects, Kavil Patel, January 2009
Biomedical Engineering
Evaluation of medical alarm sounds, Elizbha Philip, January 2009
Biomedical Engineering
Road-based proactive routing protocols for vehicular networks, Neeraj Mahadevrao Rajgure, January 2009
Computer Science
Finger walking control of a two-dimensional walking model through inverse kinematics, Jordan Ratcliff, January 2009
Biomedical Engineering
Assessing trainer hand forces for manual body weight supported walking, Manish Raval, January 2009
Biomedical Engineering
Dual parametric sensors for highly sensitive nucleic acid detection, Manu Sebastian Mannoor, January 2009
Biomedical Engineering
Development of an experimental system to determine the contribution of titin and collagen to passive stiffness of myocardium, Saurin Bharat Shah, May 2009
Biomedical Engineering
RNA secondary structure detection programs with an emphasis on covariance models, Justin Slotman, January 2009
Computer Science
Thermochemistry and bond energies of nitro -alkanes, -alkenes, -carbonyls and corresponding nitrites, Surawee Snitsiriwat, January 2009
Chemistry and Environmental Science
Water purification in Haiti : An engineers without borders project, Melissa Valoura, August 2009
Mechanical and Industrial Engineering
Non-foster matching of an RFID antenna, Nedime Pelin Yalcin, August 2009
Electrical and Computer Engineering
Mixing performance of a novel, continuous confined impinging jets mixer using competitive reactions, Han Zheng, May 2009
Chemical and Materials Engineering
Theses from 2008
Altered brain activity in autistic children versus healthy controls while performing simple tasks using fMRI, Donald Martin Adams Jr., May 2008
Biomedical Engineering
Mixing of nanoparticles in a stirred tank in high pressure carbon dioxide, Nitin Aggarwal, January 2008
Chemical and Materials Engineering
Design and fabrication of a microneedle for the implantation of floating microstimulators, Faysal Ahmed, August 2008
Biomedical Engineering
Cortical location of saccadic and vergence oculomotor learning using fMRI, Yelda Alkan, January 2008
Biomedical Engineering
Kerberos phone secure messenger, Nabeel Al-Saber, January 2008
Electrical and Computer Engineering
Design of three-dimensional axon stretch growth device, Fayekah Assanah, January 2008
Biomedical Engineering
Thermal and morphological analysis of collagen-plla electrospun blends, Angana Banerjee, May 2008
Biomedical Engineering
Ignition of metal powder by electrostatic discharge stimulation, Ervin Beloni, January 2008
Mechanical and Industrial Engineering
Long driving hours and health of truck drivers, Stephen J. Benstowe, January 2008
Mechanical and Industrial Engineering
Pattern recognition of brain fMRI images for various physiological states, Priyanka Bhatt, January 2008
Biomedical Engineering
RNA genome annotation with a focus on T. brucei, Brett Bucci, January 2008
Mathematical Sciences
Fracture healing : the effects of local insulin delivery via calcium sulfate and tricalcium phosphate, Sarah Elizabeth Buchala, January 2008
Biomedical Engineering
Dexamethasone- and age-sensitive genes in neonatal small intestine, Carla Cerqueira, January 2008
Biomedical Engineering
Automated multi-well neural injury device, Linda Y. Chen, May 2008
Biomedical Engineering
Raman scattering in free standing porous Si films, Thenappan Chidambaram, May 2008
Electrical and Computer Engineering
Multi well uni-axial stretch injury device, Mridusmita Choudhury, January 2008
Biomedical Engineering
Portable housing for Mexican migrant workers, Janet Corzo, January 2008
New Jersey School of Architecture
DEM simulated radial and axial pressure in a cylindrical granular column, Meng Cui, August 2008
Mechanical and Industrial Engineering
A two dimensional model of magnetic field assisted assembly, Gaurev Devrani, August 2008
Electrical and Computer Engineering
Creating new visualization and human interface devices for theraputic video games, Kunal Jayant Doshi, January 2008
Biomedical Engineering
Synthesis of corn-derived carbohydrate derivatives as effective multifunctional sunscreen, Xianhong Feng, May 2008
Biomedical Engineering
Comparison of linear parametric models for predicting fMRI response, Parina Gandhi, January 2008
Biomedical Engineering
Surface recordings of evoked field potentials from the cerebellum with a flexmea microelectrode array, Jonathan David Groth, May 2008
Biomedical Engineering
Brain segmentation using endogenous contrast mechanism using breath holding fMRI signal for tissue characterization, Samata Mukesh Kakkad, January 2008
Biomedical Engineering
Classification of hand held shapes and locations in continuous signing, Swetha Karri, August 2008
Biomedical Engineering
The use of instrumented measures to describe lower extremity joint mechanics, Steven Thomas Kaufman, January 2008
Biomedical Engineering
Precipitation of ultrafine particles using liquid antisolvent with concentric ultrasonic nozzle and subcritical CO2, Satya Chaitanya Kunchala, August 2008
Chemical and Materials Engineering
Derivation of the respiratory rate signal from a single lead ECG, Murtaza M. Lakdawala, May 2008
Biomedical Engineering
A virtual training environment for wheelchair mounted robot, Elizabeth Leichtnam, May 2008
Biomedical Engineering
The making and meaning of gay space : the case of the Castro in San Francisco, Scott Richard Lesher, January 2008
New Jersey School of Architecture
Experimental investigation of the fluid velocity distribution in stirred tank reactors equipped with retreat-blade impellers using laser doppler velocimetry, Deepak Rajesh Madhrani, May 2008
Chemical and Materials Engineering
Synthesis and analysis of carbon nanowalls and their raman spectroscopy, Amit Mahajan, May 2008
Electrical and Computer Engineering
The synergistic effect of pulsed electromagnetic fields and demineralized bone matrix on the osteogenic differentiation of mesenchymal stem cells, John Manocchio, May 2008
Biomedical Engineering
A comparative study of common crosslinking agents for electrospun collagen scaffolds, Pallavi Masih, May 2008
Biomedical Engineering
Design and construction of a novel transpalpebral ophthalmic tonometer, Philippe R. Moinot, May 2008
Biomedical Engineering
Interactions between adult human mesenchymal stem cells and nanofibrous scaffolds of different compositions, Lisamarie Moore, May 2008
Biomedical Engineering
Developing a virtual city for emergency preparedness planning and training, Jon K. Morgan, August 2008
Informatics
UTR prediction programs for trypanosoma brucei, Maria Moutafis, January 2008
Mathematical Sciences
A stereoscopic system using knowledge propagation to achieve accurate depth calculation, Chaitali Mulay, January 2008
Biomedical Engineering
Mapping inter-subject and inter-regional brain connectivity during free viewing of novel natural scenes, Sheela Nagaraj, January 2008
Biomedical Engineering
Process-structure-property relationships of resorbable desamino tyrosine derived polymers : effect of backbone chemistry and assembly on drug delivery, Pinar Nebol, May 2008
Biomedical Engineering
Penetration force measurements in the central nervous system with silicon electrodes, Ashwini Arun Nikam, January 2008
Biomedical Engineering
Finger joint impedance control applications to investigate spasticity, David Naisby Paglia, January 2008
Biomedical Engineering
Experimental investigation of the effect of sonication on the precipitation of grieseofluvin by impinging jets, Ankit H. Patel, August 2008
Chemical and Materials Engineering
Structure and thermochemistry of disulfide-oxygen species, Shyamala Pravin Pillai, January 2008
Chemistry and Environmental Science
Design of gait rehabilitation system, Andriy Pletenetskyy, January 2008
Mechanical and Industrial Engineering
Retransmission strategies for moving networks over ricean fading channels, Alex Ruiz Lee, January 2008
Electrical and Computer Engineering
Proactive methods for measurement of available bandwidth and link capacity, Khondaker Musfakus Salehin, January 2008
Electrical and Computer Engineering
Using wavelet and template analysis to classify hand postures in unsupervised daily activities, Soha Hassan Saleh, January 2008
Biomedical Engineering
Magnetically assisted impaction mixing of nanosize particles, James V. Scicolone, January 2008
Chemical and Materials Engineering
Photoplethysmorgraph-derived respiration, Priyanka Pankaj Shah, August 2008
Biomedical Engineering
Phase transfer in a collision between a droplet and solid spheres, Zheng Shen, January 2008
Mechanical and Industrial Engineering
Ultra-fine particle formation using principle of rapid expansion of supercritical solutions`, Miraj Minesh Sheth, January 2008
Chemical and Materials Engineering
Mutational studies in the dNTP binding pocket of human immunodeficiency virus type 1 reverse transcriptase, Smita Shukla, May 2008
Federated Department of Biological Sciences
The extraction of type 1 collagen and the fabrication of multi-filament embedded hydrogels for guided nerve regeneration, Mevan Lakmal Siriwardane, January 2008
Biomedical Engineering
Fully dense aluminum-rich aluminum copper oxide powders for energetic formulations, Demitrios Stamatis, January 2008
Mechanical and Industrial Engineering
Biomechanical testing of upright range of motion versus overhead supine range of motion, Linda Uko, August 2008
Biomedical Engineering
Development of pharmacophore and CoMFA studies for sigma2 receptor ligands, Laura Ann Wirpsza, August 2008
Chemistry and Environmental Science
Two factor authentication and authorization in ubiquitous mobile computing, Qing Zhu, January 2008
Electrical and Computer Engineering
Theses from 2007
In vitro feasibility testing of floating light-activated minroelectrical stimulators, Ammar Riad Abdo, May 2007
Biomedical Engineering
Solubility in supercritical carbon dioxide, Syed Asif Abdullah, January 2007
Chemical and Materials Engineering
Numerical analysis of the operation of a water cannon, Teymuraz G. Bitadze, January 2007
Mechanical and Industrial Engineering
