Theses from 1996
Low pressure chemical vapor deposition of silicon dioxide and phosphosilicate glass thin films, Vijayalakshmi Venkatesan, October 1996
Doing business in China : a primer for foreign architects, Shijie Wu, October 1996
Relaxation and the nature of electrical stress related defects in ultra-thin dioxide on silicon, Lihui Xie, December 1996
A critical analysis of the new urbanism, Metin Cihan Yildirim, January 1996
Granular dynamics study of sieving, Heng Yung, May 1996
A cost model for multi-lifecycle engineering design, Bin Zhang, December 1996
Simple fast vector quantization of the line spectral frequencies, Jin Zhou, May 1996
The effect of deposition of H2S on the catalyst activity of 1.5 % Pt on [gamma]-Al2O3, Ping Zhu, October 1996
Theses from 1995
The architecture of Ricardo Porro : questions of form and content, Mariano Alemany, May 1995
Numerical simulation of clipping distortion in lightwave CATV systems, Luay Al-Nadi, December 1995
Implementation of a friction estimation and compensation technique, Jayesh N. Amin, December 1995
A study of transit corridors within the NJTPA region, Mark Kagen Berger, May 1995
Analysis of calibration, robustness, detection of space-time adaptive rada using experimental data, Murat O. Berin, December 1995
Radiation damage studies in gate oxides, Sandeep G. Bharathi, May 1995
Nondestructive dynamic load testing of bridges using strain sensors, Suzanne Boland, December 1995
Effectiveness of sediment control structure : reducing nonpoint-source pollution entering a rural housing development lake in Mercer county, Pennsylvania, Elaine K. Brenner, January 1995
Low pressure chemical vapor deposition of tungsten as an absorber for x-ray masks, Hongyu Chen, October 1995
Synthesis and characterization of silicon dioxide thin films by plasma enhances chemical vapor deposition from diethylsilane and nitrous oxide, Lan Chen, October 1995
Continuous monitoring of volatile organic compound emissions using microtrap based injection technique and gas chromatography, Wenjun Chen, December 1995
Investigation of potential oxygen defect mechanism of persistent photoconductivity and photoinduced superconductivity in YBa2Cu3Ox, Denise Catherine Chew, December 1995
Modeling the fate of volatile organic compounds in wastewater treatment facilities; implementation of volatilization models in envirocad, Vinita Chhahira, May 1995
Sensivity analysis and design calculations with biofiltration models, Michael Lawrence Cohen, December 1995
Comparison of reductive dehalogenation by microbial populations on adsorptive versus non-adsorptive bioreactor support materials, Linda S. Colella, December 1995
Hazard recognition and regulation : an asbestos chronology, Diane A. Colson, January 1995
A modified LRT-based spread-spectrum receiver using spatial and temporal processing, Jeffrey L. Cutcher, May 1995
Analysis of a design for its quality manufacturability in terms of misalignments and fastener related problems, Abhinav Dhar, May 1995
The effect of liquid gallium on plastics, Vivek P. Dwivedi, October 1995
The morphology of UHMWPE wear debris generated by a hip joint simulator, Aaron P. Essner, May 1995
Adaptive radar in heterogeneous environment, Albert Futernik, December 1995
Design for quality manufacturability analysis of total nonconformity damaged parts, Samir R. Gami, December 1995
A study of settlement in landfills due to biodegradation, Michael Guasconi, October 1995
Implementation of a three-dimensional non-intrusive particle tracking system, Vivek Gupta, December 1995
Investigation into fracture behavior and longevity of pneumatically fractured fine-grained formations, Heathe Ann Hall, January 1995
A defect detection algorithm for sequential and parallel computers, Ralf Hross, May 1995
Remediation and reuse of Chromium contaminated soils through cold top ex-site vitrification, Wiwat Kamolpornwijit, December 1995
Comparison of adaptive radar algorithms : transformed SMI, eigencanceler, and SMI, Chaitanya H. Kathiari, December 1995
Integrating key functions in product development : a conceptual product development model for the Korean context, Jong-Wook Kim, December 1995
A general method for the inverse kinematics of rotational displacements in spatial mechanisms, John D. Kliminski, January 1995
Hydrodynamic and water quality modeling of the Whippany river, John E. Krohn, May 1995
Algorithms for the NJIT turbonet parallel computer, Nitin J. Lad, January 1995
Reverse osmosis as a pretreatment of ion exchange equipment at PSE & G's Hudson generation station, Steven Leon, October 1995
Gabor expansion of an equivalent dipole antenna, Oksana Manzhura, December 1995
Integration of pneumatic fracturing and in situ vitrification in coarse grained soils, Sean Thomas McGonigal, May 1995
Small computer system interface (SCSI) universal services for the turbonet parallel computer, Artak Ohan Melkonian, December 1995
Reducing rail-truck freight intermodal drayage costs, David Moy Jr., May 1995
Catalytic oxidation of trace concentrations of trichloroethylene over Cr2O3 and 5% Cr2O3 on ?-Al2O3, Soyoung Myung, October 1995
Characterization of low pressure chemically vapor deposited Boron Nitride films as low dielectric constant materials, Manish Narayan, December 1995
Signal processing techniques in heart rate and systolic arterial blood pressure variability studies, Christopher O'Bara, December 1995
Recombinant architecture on materiality in architectural methods, James P. O'Brien, May 1995
Construction of accurate molecular models using laser stereolithography and determination of NMR spectra for amiloride hydrochloride and its free base, Ana Deborah Ofsievich, December 1995
Effect of fiber-matrix coupling on the mechanical properties of a totally bioabsorbable composite, Barbaro Jesus Perez, May 1995
Application of approximate graph matching techniques for searching databases of two-dimensional chemical structures, Karen R. Pysniak, October 1995
Design and development of four to sixteen channel video multiplexers, Ronan Rahimi, December 1995
Synthesis of boron nitride/vycor composite membrane structures by an optimized LPCVD process, Chenna Ravindranath, October 1995
The development of an embedded wireless modem conforming to advanced mobile phone system and cellular digital packet data standards, Xin Ren, December 1995
The effects of chromated copper-arsenate (CCA) pressure-treated wood on local sediments and benthos in a freshwater lake, William A. Romeo, December 1995
Butler center : a case for the adaptive reuse of industrial buildings, Lori J. Ryder, October 1995
Analysis of the oxidation of isotox by immobilized bacteria, Chad Sheng, May 1995
Configuring the radial basis function neural network, Insoo Sohn, December 1995
Application of signal processing techniques for measurement of muscle fiber conduction velocity, Satheesh Kumar Swaminathan, May 1995
Linearly tapered slot antenna, Luis Alberto Tumialan, December 1995
A comparative study of image compress schemes, Kui Wang, December 1995
Congestion management systems development and implementation : four case studies, Arlene Rose-Marie Willis, October 1995
Determination of physical parameters affecting biofiltration of VOCs, Steven Matthew Wojdyla, December 1995
Volatilization of contaiminants from wastewater, Shaoyan Wu, May 1995
Design and analysis of environmentally safe cooling systems for machine tools, Haiping Xu, December 1995
Factors effecting calcification of bioprosthetic heart valves, Sumei Yu, October 1995
Optimizing rail-truck intermodal drayage operations, Wen Zhang, October 1995
Chute flow experiments, Yahong Zhang, October 1995
Theses from 1994
Implementation of time-frequency distribution software and its use to study biological signals, Mansour Adib, December 1994
Use of multiple transmitters for 3-D non-intrusive particle tracking, Jitesh H. Agrawal, December 1994
Artificial dielectrics : characteristics at low and microwave frequencies, Nitish Agrawal, October 1994
Dynamic friction measurement, Atif Aly, May 1994
An integrated approach to implement ISO 9000 series standards to United States manufacturing industry, Jatin N. Amin, May 1994
Model parameter identification for rod and cone oscillatory potentials, Kehur Banker, December 1994
Development of a multi-lead trans-thoracic impedance pneumograph for heart rate variability studies, Curtis Bashford, December 1994
Quantitative studies of an immobilized cell oxidative bioreactor, Timothy Lance Borkowski, December 1994
Wear of polyethylene and hylamer on cobalt-chromium : a knee simulator study, Alessandro F. Canonaco, December 1994
Investigation of velocity distribution within high speed waterjet, Hong Cao, December 1994
A novel beam-assisted thickness measurement technique for nanostructures, Luis Manual Casas, May 1994
Off-line hand-printed chinese character recognition based on stroke matching, Sunshine Chang, December 1994
Stress-strain behavior of high strength concrete cylinders, Danqing Chen, December 1994
CEBus demonstration system, Liang-Chuang Chen, October 1994
A comparison between revealed preference (RP) and stated preference (SP) based on results of simulations, Qiuzi Chen, December 1994
Scheduling of flexible manufacturing systems with automated guided vehicles using petri net models, Hua-Sheng Chiu, December 1994
A distributed network architecture for video-on-demand, Ge Dai, October 1994
Wear and friction of hylamer and polyethylene against cobalt chromium a pin-on-disc study, Jerry D'Alessio, II, December 1994
Synthesis of silicon oxide/VYCOR composite membrane structures by an optimized LPCVD process, Abhijit Datta, December 1994
Economic and monetary union in Europe, Charalambos K. Demetriou, December 1994
Performance evaluation and sequence control of an automatedmanufacturing system, Vijaykumar D. Desai, December 1994
Autonomic nervous system evaluation using time-frequency analysis, Sanjay Fernando, October 1994
Removal of chlorinated hydrocarbons from water by air stripping and solvent sublation, Alpana Gami, December 1994
Viscoelastic effects on parallel flow stability, transition to turbulence, and turbulent flow, Michael Garofalo, December 1994
Development of an expert system to facilitate a pump manufacturing/warehouse facility, Muhammad Mutahir Ghauri, December 1994
Catalytic oxidation of trichloroethylene over 5% [alpha]-Fe2O3/[gamma]-Alumina on a honeycomb monolith, Jeongho Han, December 1994
The cyberspace workplace : an argument and design for the virtual office, Richard C. Jones, December 1994
Measurement of the reaction to stress and meditation using brain wave coherence and heart rate variability, Christopher B. King, December 1994
Low pressure chemical vapor deposition of copper films from CU(I)(HFAC)(TMVS), Wei-Shang King, December 1994
A GIS based multi-modal multiple optimal path transit advanced traveler information system, Nicholas A. Koncz, October 1994
Simulation analysis of FDDI network using NETWORK II.5 software package, Anastassis A. Lazarides, May 1994
