Document Type
Thesis
Date of Award
5-31-1981
Degree Name
Master of Science in Chemical Engineering - (M.S.)
Department
Chemical Engineering and Chemistry
First Advisor
Hung T. Chen
Second Advisor
William H. Snyder
Third Advisor
George Y. Lei
Abstract
A photo initiated polymerization of styrene was carried out in a continuous stirred tank reactor operated periodically with UV on/off regulations, to study the performances of the reactor on the broadening of molecular weight distribution and the effect on the molecular weight of polymer product. Results were then compared with those from steady state process without UV on/off regulations.
Theoretical studies were also done with a mathematiCal model, considering initiation, propagation, termination and chain transfer reactions, to simulate the periodical operations. Effects from the variations in some important parameters are discussed.
Increases in polydispersities up to 100% were found in experiment, and predictions from computer calculations show that increases even higher if the operating temperature is low, and the ratio of light-off period to the on/off regulation period is high. The oscillation in the outlet of the reactor is shown to be easily damped by simply decreasing the on/off regulation period and without changing the average values of the effluent properties. Further, the reactor is indifferent to the variations in residence time and to the changes in the concentration of photo-sensitizer, which initiates the polymerization by absorbing UV light.
Periodical operation by appling UV light regulations is found to overcome the negative influences from the continuous flow process, which limits the performances of other periodically operated polymerization reactors studied in many other works. This superority also reveals the advantage of photo-reactors in the reaction control.
Recommended Citation
Lin, Dhei-Jhai, "Continuous photo-polymerization reactor in periodical operation" (1981). Theses. 3681.
https://digitalcommons.njit.edu/theses/3681
