Document Type

Thesis

Date of Award

5-31-1981

Degree Name

Master of Science in Civil Engineering - (M.S.)

Department

Civil and Environmental Engineering

First Advisor

R. John Craig

Second Advisor

Frederick G. Lehman

Third Advisor

C.T. Thomas Hsu

Abstract

This study addresses the behavior in pure bending of reinforced concrete beams reinforced with deformed steel fibers.

Six full sized beams were cast and load tested to determine their moment deflection curves. The first set of two beams had a cross section of 7" x 15". They were doubly reinforced concrete beams reinforced with steel fibers. The reinforcing steel was grade 60. The second set of two beams also had a cross section of 7" x 15". They were doubly reinforced concrete beams reinforced with steel fibers. The reinforcing steel was grade 40. The third set of two beams had a cross section of 8" x 12". They were singly reinforced concrete beams. One contained steel fibers, the other did not. The reinforcing steel was grade 60 and the concrete was high strength as opposed to normal strength for the other two sets.

Computation of the theoretical moment-deflection relationship was done for each of the six test beams using a computer test developed for this study. In the computer analysis it was found that the exact material stress strain curves could not always be used to predict the experimental results. However, logical trends were found that could be used to predict, with considerable success, the experimental results.

Share

COinS
 
 

To view the content in your browser, please download Adobe Reader or, alternately,
you may Download the file to your hard drive.

NOTE: The latest versions of Adobe Reader do not support viewing PDF files within Firefox on Mac OS and if you are using a modern (Intel) Mac, there is no official plugin for viewing PDF files within the browser window.