Document Type
Thesis
Date of Award
8-31-1982
Degree Name
Master of Science in Mechanical Engineering - (M.S.)
Department
Mechanical Engineering
First Advisor
Aaron Deutschman
Second Advisor
Aaron Deutschman
Third Advisor
John Vincent Droughton
Abstract
An experimental study was undertaken to investigate the effects of ultrasonic energy on the mixing of fuel and air for an internal combustion engine in order to obtain more complete combustion. The experiment was performed using a six-cylinder 1968 Ford internal combustion engine. Two ultrasonic power generators were used in the study: a 10 watt Ultrasonic Power Logicon Model 10CA manufactured by UTHE Technology International and an ultrasonic generator Model G-100 Mark III, manufactured by Fibra Sonics, Inc. The experiment was performed with and without a nozzle extension attached to the transducer horn, for five different throttle positions. The same data points were taken with and without the ultrasonic generator energized.
The goal of the study is to see if there was any effect on the efficiencies of the internal combustion engine as a result of the use of ultrasonic mixing. From the analysis of results, it is clear that ultrasonic mixing of fuel and air caused the thermal efficiency to increase from 0.9% to 23.8% without the nozzle extension and from 1.3% to 19.1% with the nozzle extension (see Tables 11 and 12). The engine efficiency was increased from Q.9% to 23.8% without the nozzle extension and from 1.3% to 14.3% with the nozzle extension. The specific fuel consumption decreased from 0.5% to 22.2% without the nozzle extension and from 0.9% to 45.4% with the nozzle extension. The range of engine speeds was varied between 750 rpm and 3,500 rpm.
Recommended Citation
Usman, Larry E., "Ultrasonic mixing of the fuel-air mixture and its effect on the thermal efficiency of an internal combustion engine" (1982). Theses. 3684.
https://digitalcommons.njit.edu/theses/3684
