Document Type
Thesis
Date of Award
5-31-1981
Degree Name
Master of Science in Chemical Engineering - (M.S.)
Department
Chemical Engineering and Chemistry
First Advisor
William H. Snyder
Second Advisor
Leonard Dauerman
Third Advisor
Howard David Perlmutter
Abstract
Toluene diisocyanate was reacted with equimolar amounts of hydroxy ethyl methacrylate and p-cresol in dimethoxy ethane to prepare the monomers. Dibutyl tin dilaurate was used as a catalyst at controlled temperatures in nitrogen atmosphere. The recrystallized monomers were polymerized free radically in solution using azobis isobutyronitrile as initiator and mercaptoethanol as chain transfer agent. Petroleum ether was used to precipitate the polymer
Monomers were characterized by melting point, infrared spectra and vapor pressure osmometry whereas polymers by vapor pressure osmometry, membrane osmometry, intrinsic viscosity and the infrared spectra.
Adhesive bonding experiments were tried using cold-cure acrylic systems containing homopolymers and forward monomers on 0.4 mm. thick dentin slices sandwiched between 1/4 inch diameter aluminum test fixtures. The test samples were immersed in distilled water for one week at 37°C before testing in the Instron tester. As an initial step, the experimental results were encouraging.
Recommended Citation
Joseph, Edakkalathoor K., "Preparation, characterization and testing of monomers, polymers and adhesive compositions containing blocked isocyanate functions" (1981). Theses. 3675.
https://digitalcommons.njit.edu/theses/3675
