Measurement of melt viscoelastic properties of polyethylenes and their blends - A comparison of experimental techniques

Document Type

Article

Publication Date

1-1-1997

Abstract

Two polyethylene resins (LDPE and HDPE) and their blends were characterized for dynamic shear rheology, extrudate swell in a capillary rheometer, and recoverable strain as measured by the Melt Elasticity Indexer in attempts to compare parameters related to the so-called "melt elasticity" as obtained by different experimental techniques. Such parameters may be useful in screening materials for their melt processability. Data were obtained at equivalent shear rates/frequencies and different temperatures. With respect to the individual blend components, the LDPE resin with the lower Melt Index (MI) had higher storage modulus and Weissenberg number than the HDPE resin. However, by using criteria based on "recoil" and strain recovery, ranking was different with the LDPE resin shown to exhibit lower "melt elasticity." In this case, extrudate swell data were found to correlate reasonably well with equilibrium recoverable strain data. With respect to blends, complex viscosity and storage modulus versus composition curves showed positive deviations from linearity, similar to those observed in melt heterogeneous blends. Similarities between the short time recoverable strain vs. composition and the storage modulus vs. composition curves suggest that similar morphological states may exist in the melt over the experimental times and conditions applicable to these different experimental techniques.

Identifier

0031166410 (Scopus)

Publication Title

Polymer Engineering and Science

External Full Text Location

https://doi.org/10.1002/pen.11755

ISSN

00323888

First Page

1102

Last Page

1112

Issue

6

Volume

37

This document is currently not available here.

Share

COinS