Dissertations from 1994
Experimental and numerical determination of fluid velocity profiles and turbulence intensity in mixing vessels, Chun-Chiao Chou, December 1994
Robust approach to object recognition through fuzzy clustering and hough transform based methods, Tianxiong Fu, December 1994
Local stress factors of pipe-nozzle under internal pressure, Jih-Lian Jack Ha, October 1994
Analytical and simulation models of weaving area operations under non-freeway conditions, Muhammad Shahid Iqbal, October 1994
Oxidation of pollutants in a batch recirculation bioreactor with immobilized microorganisms, Jongtai Jung, May 1994
Blind detection in channels with intersymbol interference, Raafat Edward Kamel, May 1994
Design and micro-fabrication of tantalum silicide cantilever beam threshold accelerometer, Chang Joo Kim, December 1994
Investigation of paraelectric PTL thin films using reactive magnetron sputtering, Hyun Hoo Kim, January 1994
A petri-net based methodology for modeling, simulation, and control of flexible manufacturing systems, Venkatesh Kurapati, December 1994
Particle dynamics modeling of vibrating granular beds, Yidan Lan, May 1994
Section I: Thermodynamic properties of hydrocarbon radicals, peroxy hydrocarbon molecules and radicals Section II: Kinetics and reaction mechanisms for : (1) chloroform pyrolysis and oxidation (2) benzene and toluene oxidation under atmospheric conditions, Tsan-Horng Lay, December 1994
Electrical characteristics of novel heterojunction diodes of thin relaxation semiconductors/p-Si/, Hyung Joo Lee, December 1994
Algorithms in fault-tolerant CLOS networks, Hyunyeop Lee, October 1994
An office document retrieval system with the capability of processing incomplete and vague queries, Qianhong Liu, January 1994
Improvement of waterjet and abrasive waterjet nozzle, Zheng Li, October 1994
Combustion of methyl chloride, monomethyl amine, and their mixtures in a two stage turbulent flow reactor, Fuhe Mao, December 1994
Estimation and cancellation of friction in control systems, Sofia Mentzelopoulou, January 1994
Behavior of biaxially loaded concrete-encased composite columns, Pedro Ricardo Munoz, January 1994
Motion estimation using optical flow field, Jingning Pan, May 1994
Engineering analysis of a packed-bed biofilter for removal of volatile organic compound (VOC) emissions, Zarook M. Shareefdeen, May 1994
Analysis of plates and reinforced concrete columns by cubic b-spline function, Gang Wang, December 1994
Biological denitrification : fundamental kinetic studies, and process analysis for sequencing batch reactor operation, Jun-Hsien Wang, May 1994
Shear strength and fatigue crack propagation in concrete by energy method, Wei Wang, January 1994
Motion synthesis of mechanisms using constraint manifolds in image space, Yeou-Kai Wu, January 1994
A nondestructive method for the determination of fracture energy in concrete structures, Been-Jyh Yu, January 1994
Heart rate variability study using phase response curve, Peizhuan Zhang, May 1994
Dissertations from 1993
Behavior of concrete and slender reinforced concrete columns under cyclic axial compression with bidirectional eccentricities, Byong Youl Bahn, January 1993
Computer aided stress analysis of the femur with prosthetic hip stem utilizing computed tomography, Wei-Chun Chang, December 1993
Minimum redundancy array structure for interference cancellation, Wan-Ling Chen, May 1993
Deposition of particles in a convergent channel, Hsi-Chung Chiou, October 1993
Competition between two microbial populations in a sequencing fed-batch reactor and its implications for waste treatment applications, Sitaram Dikshitulu, May 1993
Tensile behavior of concrete and mortar under direct impact tensile load, Kayumars Emad, May 1993
A comprehensive part model and graphical schema representation for object-oriented databases, Michael H. Halper, October 1993
Pyrolysis and oxidation of chloromethanes experiment and modeling, Wenpin Ho, October 1993
Human visual system modelling : analysis of evoked potential dynamics, Zongqi Hu, December 1993
Engineering design of an anaerobic-aerobic system to treat chlorophenols, Chih-Ju Jou, October 1993
An investigation of the formation of turbulent water and abrasive water jets, Md. Ekramul Hasan Khan, December 1993
Methodology for modeling high performance distributed and parallel systems, Rakesh Kushwaha, October 1993
Algorithms for generation of path-methods in object-oriented databases, Ashish Mehta, May 1993
Unreinforced masonry structures : nonlinear analysis and evaluation of some rehab schemes, Sanjay Mehta, May 1993
Dmodel and Dalgebra : a data model and algebra for office documents, Fortune Solani Mhlanga, May 1993
Medium access control mechanisms for high speed metropolitan area networks, Michail Papamichail, October 1993
Characterization of advanced etching reactors using novel diagnostic tools, Vipulkumar Patel, May 1993
Morphological operations in image processing and analysis, Chamim Christopher Pu, October 1993
Numerical investigation of flow through wide angle diffusers, Moududur Rahman, December 1993
Theoretical evaluation of the break off test for concrete, Arjuna Priyara Ranasinghe, January 1993
Kinetic study of decomposition of azo dyes and phenol in advanced oxidation processes reaction mechanisms, pathways and intermediates, Hung-Yee Shu, May 1993
On orthogonal collocation solutions of partial differential equations, Herli Surjanhata, May 1993
Constitutive equation for concrete using strain-space plasticity model, Yuxiang Xing, May 1993
Aqueous absorption of nitrogen oxides induced by oxychlorine compounds : a process development study for flue gas treatment, Chen-Lu Yang, December 1993
MegSDF Mega-system development framework, Tamar Zemel, May 1993
On generalized adaptive neural filter, Zhiqiang Zhang, October 1993
Dissertations from 1992
Analysis of the optimum extraction system design for the separation and purification of rare earths, Kenneth Yeon-Kang Chan, December 1992
Investigation of the striation formation in the course of abrasive waterjet cutting, Jo-fei Chao, December 1992
Development of prediction technique for the geometry of the abrasive waterjet generated kerf, Yichung Chung, May 1992
A study on radical scavenging and magnetic resonance imaging characteristics of stable radical nitroxides, Shiey-Shiun Horng, October 1992
Behavior of high strength concrete and slender reinforced concrete columns with and without steel fibers, Lin Showmay Hsu, October 1992
Expert system for the injection molding of engineering thermoplastics, Tzy-Cherng Jan, October 1992
Particle dynamics modeling of boundary effects in granular couette flow, Hyeong-Jin Kim, May 1992
Process technology and characterization for field emission devices, Jong Min Kim, May 1992
Performance evaluation of spread spectrum system with cochannel interference through a nonlinear channel, Yong H. Kim, May 1992
Investigation of waterjet-workpiece interaction, Hung-Yuan Li, May 1992
Structural reliability using finite element method, Che-Chen Liou, May 1992
Fabrication and characterization of gated silicon field emission micro triodes, Nanchou Liu, October 1992
Kinetic studies of photo-initiated oxidation of toxic organic pollutants including the formation and the destruction of intermediates, Yuan-Shen Li, May 1992
A modified approach to flood prediction in urban watersheds, Joseph Ofungwu, May 1992
Analysis of a band-saw, Suat Ali Ozsoylu, December 1992
Investigation of reactor design parameters towards optimizing biodegradation of chlorophenols by phanerochaete chrysosporium, Nirupam Pal, December 1992
On adaptive censored CFAR detection, Loizos Anastasiou Prastitis, December 1992
The influence of pore fluids on shear strength and stress-strain behavior of granular soils, Prasanna Ratnaweera, October 1992
Investigation of epitaxial lift-off GaAs and langmuir-blodgett films for optoelectronic device applications, Divyang M. Shah, May 1992
Study of surface properties produced by magneto-plasma on nitriding for improving wear resistance, I-Tsung Shih, December 1992
Kinematic synthesis of adjustable four-bar mechanisms for multi-phase motion generation, Shao Jie Wang, December 1992
Investigation of the consumer electronics bus, Jaesoo Yang, December 1992
Statistical random and fractal characterization of surface topography with engineering applications, Gongyao Zhou, December 1992
Dissertations from 1991
A generalized, parametric PR-QMF/wavelet transform design approach for multiresolution signal decomposition, Hakan Caglar, May 1991
The theory of bootstrapped algorithms and their applications to cross polarization interference cancelation, Abdulkadir Dinc, May 1991
Crystallization kinetics and polyblends of poly(ethylene terephthalate) recycled from post-consumer beverage bottles, Peming Peter Hsu, May 1991
Mathematical modeling of mass transfer in microvascular wall and interstitial space, Daekyung Kim, May 1991
Integrated anaerobic-aerobic system for the biodegradation of highly chlorinated aromatic compounds, Cheng-Ming Kung, October 1991
A combined gel entrapped and membrane attached microbial process for biodegrading organic compounds, Fayaz Saifuddin Lakhwala, May 1991
Improving the throughput of plasticating extruders : manufacture of non-circular pellets, measurement of their interparticulate friction coefficient, and implications for screw design, Chia-Ying Liu, December 1991
Mathematical modeling of chemical vapor deposition processes and its application to thin film technology, Norman W. Loney, May 1991
On local stresses and spring constants of a sphere-nozzle connection, Ban-Li Lyow, May 1991
Thermodynamics of strong electrolyte solutions : prediction of osmotic coefficients by pair correlation function method, One Kwon Rim, May 1991
Behavior of square and L-shaped slender reinforced concrete columns under combined biaxial bending and axial compression, Wen Hu Tsao, December 1991
Investigation of stagnation flow heat transfer for a heated horizontal round plate, Ching-Hua Wei, May 1991
Kinetic studies on pyrolytic and oxidative decomposition of chlorocarbons in a tubular flow reactor, Yang Soo Won, May 1991
Dissertations from 1990
Correlation between particle velocities and conditions of abrasive waterjet formation, Wei-Long Chen, May 1990
Mass transfer of hazardous organic compounds in soil matrices relevant to thermal desorption/incineration, Jong-In Dong, May 1990
Effect of inorganic salts on adsorption process, Pai-Yuan Horng, May 1990
On the performance of minimum redundancy array for multisource direction finding, Byung-Seub Lee, May 1990
Computer aided localization of neurological diseases, Yusuf Parlar, May 1990
On local stresses and spring constants of pipe-nozzle connection, Hson-Chih Sun, May 1990
Computer modeling and analysis of biological rhythms, Shi Xiong Yang, May 1990
Dissertations from 1989
Thermotropic liquid crystalline polyesters based on the monomer of poly(ethylene terephthalate), Satish Baliga, May 1989
Bond and fatigue characteristics of high-strength cement-based composites, Somboon Chimaphant, May 1989
Propagation of millimeter wave signals in forests using the equation of radiative transfer with strong forward scattering phase functions, Nack Yang Cho, May 1989
Air stripping of volatile organic contaminants using rotating disc contactor, Kai-Ping Hsueh, May 1989