Adaptive co-channel interference cancelation and signal separation method
Document Type
Conference Proceeding
Publication Date
12-1-1989
Abstract
A method for co-channel interference suppression and signal separation was proposed in a previous work. It uses the amplitude variation of the composite signal to estimate the parasitic phase modulation impinged on the strong desired signal by the weak interference signal. This estimate is then used to cancel out the distortion of the composite signal, revealing the desired signal. In the cancellation process, amplitude estimates for both signals were obtained from measurements. Errors in estimating these magnitudes limit the quality of cancellation and signal separation performance. An adaptive method is proposed which improves these estimates and, hence, results in a better cancellation of interference. A criterion for performance measure was chosen to be the variance of the envelope of the weak signal estimate and is shown to be directly related to the cancellation quality. A random search algorithm was used to vary the signal magnitude estimates to achieve better estimates. Numerical simulation experiments were performed to prove the concept, including Gaussian noise. In comparison with nonadaptive methods, the adaptive approach exhibits an additional 21 dB of interference suppression. This corresponds to a total reduction of 41 dB in the residual rms phase error of the strong signal relative to the use of a conventional detector.
Identifier
0024937686 (Scopus)
Publication Title
Conference Record International Conference on Communications
ISSN
05361486
First Page
825
Last Page
830
Volume
2
Recommended Citation
Bar-Ness, Yeheskel and Bunin, H., "Adaptive co-channel interference cancelation and signal separation method" (1989). Faculty Publications. 20705.
https://digitalcommons.njit.edu/fac_pubs/20705
