Document Type
Thesis
Date of Award
Fall 1-31-1993
Degree Name
Master of Science in Manufacturing Systems Engineering - (M.S.)
Department
Manufacturing Engineering Division
First Advisor
Steve Kotefski
Second Advisor
R. S. Sodhi
Third Advisor
E. S. Geskin
Abstract
The purpose of this thesis is to find the solution of those problems which occur during plastic injection molding process. Molding cycle problem analysis is an important field in plastic injection process. It is very necessary to catch the problems during operation. Therefore on the basis of research trouble shooting criteria is prepared.
Good quality control is an essential feature for finding any sort of fault. Quality control is associated with each and every step of operation to maintain the required shape and surface finishing.
Most of the molding problems are solved by varying the machine conditions and by changing the design of the mold. But some problems remain unchanged, therefore in such cases possible solution may be find out by means of examining the entire operation or by changing the variables. Therefore on the basis of this research a trouble shooting program or a program solver is prepared, which helps to get the correct solution of the problems.
Recommended Citation
Kamal, Zafar, "Trouble shooting in plastic injection molding machines" (1993). Theses. 1253.
https://digitalcommons.njit.edu/theses/1253
