Oxygen vacancy defect engineering using atomic layer deposited HfAlOx in multi-layered gate stack
Document Type
Article
Publication Date
5-2-2016
Abstract
This work evaluates the defects in high quality atomic layer deposited (ALD) HfAlOx with extremely low Al (<3% Al/(Al + Hf)) incorporation in the Hf based high-k dielectrics. The defect activation energy estimated by the high temperature current voltage measurement shows that the charged oxygen vacancies, V+/V2+, are the primary source of defects in these dielectrics. When Al is added in HfO2, the V+ type defects with a defect activation energy of Ea ∼ 0.2 eV modify to V2+ type to Ea ∼ 0.1 eV with reference to the Si conduction band. When devices were stressed in the gate injection mode for 1000 s, more V+ type defects are generated and Ea reverts back to ∼0.2 eV. Since Al has a less number of valence electrons than do Hf, the change in the co-ordination number due to Al incorporation seems to contribute to the defect level modifications. Additionally, the stress induced leakage current behavior observed at 20 °C and at 125°C demonstrates that the addition of Al in HfO2 contributed to suppressed trap generation process. This further supports the defect engineering model as reduced flat-band voltage shifts were observed at 20 °C and at 125 °C.
Identifier
84968813562 (Scopus)
Publication Title
Applied Physics Letters
External Full Text Location
https://doi.org/10.1063/1.4948583
ISSN
00036951
Issue
18
Volume
108
Recommended Citation
Bhuyian, M. N.; Sengupta, R.; Vurikiti, P.; and Misra, D., "Oxygen vacancy defect engineering using atomic layer deposited HfAlOx in multi-layered gate stack" (2016). Faculty Publications. 10540.
https://digitalcommons.njit.edu/fac_pubs/10540
