Experimental and computational determination of the hydrodynamics of mini vessel dissolution testing systems

Document Type

Article

Publication Date

8-20-2016

Abstract

Mini vessel dissolution testing systems consist of a small-scale 100-mL vessel with a small paddle impeller, similar to the USP Apparatus 2, and are typically utilized when only small amounts of drug product are available during drug development. Despite their common industrial use, mini vessels have received little attention in the literature. Here, Computational Fluid Dynamics (CFD) was used to predict velocity profiles, flow patterns, and strain rate distribution in a mini vessel at different agitation speeds. These results were compared with experimental velocity measurements obtained with Particle Image Velocimetry (PIV). Substantial agreement was observed between CFD results and PIV data. The flow is strongly dominated by the tangential velocity component. Secondary flows consist of vertical upper and lower recirculation loops above and below the impeller. A low recirculation zone was observed in the lower part of the vessel. The radial and axial velocities in the region just below the impeller are very small especially in the innermost core zone below the paddle, where tablet dissolution occurs. Increasing agitation speed reduces the radius of this zone, which is always present at any speed, and only modestly increases the tangential flow intensity, with significant implication for dissolution testing in mini vessels.

Identifier

84978069217 (Scopus)

Publication Title

International Journal of Pharmaceutics

External Full Text Location

https://doi.org/10.1016/j.ijpharm.2016.06.036

e-ISSN

18733476

ISSN

03785173

PubMed ID

27317988

First Page

336

Last Page

349

Issue

1

Volume

510

This document is currently not available here.

Share

COinS